For fan dimensions, (other countries). specific requirements. see Fig. A. If there is damage to the fitted lead Exhaust air must not be discharged 2. Attach the ducting over the inlets and this must be replaced by the into a flue used for exhausting outlet and secure it with worm manufacturer or service agent. fumes from appliances supplied drive clips. If you have any queries before with energy other than electric. installing these products or after they Requirements of all authorities Connecti

speed for 10 minutes -long press (>1.6sec.) = max. speed for 30 minutes After this time has elapsed the fan returns to the lowest position. MOUNTING INSTRUCTIONS AND RECOMMENDATIONS • Never mount the emitters and/or receivers in a metal distribution box, housing or netting. • Wherever possible, avoid mounting the emitters and/or receivers in the immediate vicinity of large metal objects. • Never mount emitters and/or receivers on (or near) the ground. • Best results are obtained when mounting th

LOW-PROFILE WALL HOODS DISCHARGE OPTIONS 11/2" (38) 25/8" (60) TO CENTER OF TRANSITION ATO CENTER OF TRANSITION Verticaldischarge. ATO CENTER OF TRANSITION 11/2" (38) 2" (51) TO CENTER OF TRANSITION Horizontaldischarge. 9" (229) 55/8" (143) TO CENTER OF TRANSITION ATO CENTER OF TRANSITION Verticaldischargewithaccessorytransition. Pro Wall Hood Specifications wolfappliance.com/specs Discharge Specifications 24" AND 27" DEEP WALL HOODS The illustration below provides dimensions for vertical discha

1 GENERAL INFORMATION 1.1 General information page 4 1.2 Symbols page 5 1.2.1 Editorial pictograms page 5 1.2.2 Safety pictograms page 5 1.3 Technical data page 6 1.3.1 Overall dimensions page 6 1.3.2 Technical features page 6 1.3.3 Technical notes page 6 1.3.4 Proper use page 6 1.4 List of accessories supplied page 7 1.4.1 Storage page 7 1.4.2 Receipt and unpacking page 7 Chap. 2 INSTALLATION 2.1 Instructions for installation page 8 2.2 Selection of position of the unit page 8 2

2). - Itshouldnotbedirectlyoveranotherappliance(television set, radio, refrigerator, etc.), or over a source of heat (fig. 3). - There should be no obstacles for reception of signals emitted by the remote control (fig, 4). Xpelair Fig. 3 CHAP. 2.3 INSTALLATION OF THE UNIT 2.3.1 Drilling the wall This operation should be carried out using the propertools to facilitate your work and prevent excess damage or disturbance to your client. The best tools for drilling large holes in walls are s

sensor disconnected 0 0 0 14-TSF short on condenser sensor 0 0 o ................ 15-TSF condenser sensor 0 0 0 0 The end of the self-test will be signalled by all the leds lighting up at once and blinking ten times, as well as by an acoustic signal. At this time, you can adjust the temperature reading on the room temperature sensor. This correction is important if the air conditioner is installed high on the wall in a room where the warm air tends to stratify upward (as in rooms with high

35 Control of fan speed Fig. 36 External air intake digitemp 21 Xpelair 3.4.12 Use button T3 to select Night well-being Mode, which Night well-being includes the following functions: mode - Gradual Increase of the temperature set for cooling, - Gradual reduction of the temperature set for heating (only HP models). - Reduction of noise level. - Lower energy consumption at night. To select Night well-being mode press button T3 after selecting the operating mode using button T4 and setti

We offer a wide range of elegantly designed cooker hoods to suit every kitchen design and budget to keep rooms free of steam and odour. Crafted from high quality materials such as stainless steel, Xpelair cooker hoods are a stylish addition to any kitchen. With push button controls and built in spot lights they are designed for practicality and ease of use. Xpelair's cooker hoods will help you create the perfect environment in your kitchen. 3 90 curved Product code: 91202AW Description: 90 cm Cu

306008. Registered Office; Morley Way, Peterborough PE2 9JJ, England. in view of the APPLIED ENERGY PRODUCTS LIMITED policy of continuous product improvement, the right is reserved to change specification, colour range and prices of the models and items illustrated or described in this publication. You should therefore check current details with your XPELAIR sales representative. X030 March 2004

Colour Size 60cm Splashback 91204AW Stainless Steel 60 x 75 70cm Splashback 91205AW Stainless Steel 70 x 75 90cm Spalshback 91206AW Stainless Steel 90 x 75 100cm Splashback 91207AW Stainless Steel 100 x 75 110cm Splashback 91208AW Stainless Steel 110 x 75 11 sales hotline 08709 000420 sales fax 08709 000520 Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ, England Tel: 01733 456789, Fax: 01733 310606 Registered in England No. 306008. Registered Office; Morley Way, Peterborough PE2 9