Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Cardinal Gates XTG

downloaded: 2File size: 27 kb    Manafacture: Cardinal Gates  
Category: Pets Equipment

Loosen screws on gate (2X). a 2X 3. Slip feet onto bottom of gate. to gate, attach with screw. Extend gate to desired width and re-tighten screws. HINT: Gate can be placed against door jam for extra stability (see above). GATE WARRANTY Your Cardinal Gate is warranted to be free of manufacturing defects for a period of one year from the date of purchase when used in homes, and according to manufacturers instructions. When used commercially, such as day care centers, the warranty is 90 day

Cardinal Gates THE STEP-OVER GATE FOR SMALL BREEDS SG-1

downloaded: 1File size: 30 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

Loosen screws on gate (2X). a 2X 3. Slip feet onto bottom of gate. Extend gate to desired width and re-tighten screws. HINT: Gate can be placed against door jam for extra stability (see above). GATE WARRANTY Your Cardinal Gate is warranted to be free of manufacturing defects for a period of one year from the date of purchase when used in homes, and according to manufacturers instructions. When used commercially, such as day care centers, the warranty is 90 days. Cardinal Gates, lnc. will

Cardinal Gates PG-35

downloaded: 0File size: 227 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

A. © OPTION: INSTALL WALL MOUNTS IN STEP FOUR BEFORE THIS STEP TWO IF DESIRED. tm. 'I, 1. Extend both bottom extension rods to wall centering gate in opening, expanding no more than 2 1/4" (6 cm). Tighten in place with wrench. 2. Extend top hinge-side extension rods to match the same distance as the bottom expansion rods on that side. Tighten black washers (A) to secure. Extend latch side top expansion rods to close gap until gate securely engages with latch. 4. For a more secure gate, i

Cardinal Gates MG15

downloaded: 5File size: 169 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

Install hinge bracket (A) to wall (stationary side of gate) using Phillips screw (C) beginning 6 Y/' above floor surface. (Use ruler on left edge of this sheet to measure from floor) fw D ■g 2X REPEATAT BOTTOM OF GATE _ 3. - CD Insert eye bolts (D) into top and bottom of hinge side gate (side with three holes). Be sure nuts are tight. C Install second screw (C) in top of hinge bracket securing it to the wall. Hang gate by inserting hinge rod (B), through top of mounted hinge bracket

Cardinal Gates EX-5

downloaded: 4File size: 93 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

USING HARDWARE FROM THE SS-30 GATE, install hinge bracket (A) to wall using Phillips screw (C) beginning 6W' above floor surface. Install second screw (C) in top of hinge bracket securing it to the wall. (Use ruler on left edge of this sheet to measure J from floor) » \ 2X Insert eye bolts with standard nut and washer (N) into top and bottom of the first 2!/." BX2 extension. - CO in - ■s»- - CO CM 4. Connect BX2 extensions together by using three (3) iy2" hex head bolts and washer us

Cardinal Gates DURAGATE MG25

downloaded: 2File size: 170 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

Place gate on top of carton to establish height. Use short screws (C) for doorframes or longer screws (D) into drywall to reach a stud. & 2. Level gate by adjusting telescoping tube attached to upper gate with allen wrench (F). & 2X 3. Loosen width adjustment set screws at top and bottom of gate with allen wrench (F) slightly to allow gate to expand. Keep plastic shipping tabs in place. 4. Attach latch bracket (A) to latch rod with bracket snug against bottom of eye bolt. Expand gate so th

Cardinal Gates door lock

downloaded: 12File size: 97 kb    Manafacture: Cardinal Gates  
Category: Doors and Windows

Be sure nuts are tight. Hang gate by inserting hinge rod (B), through top of mounted hinge bracket (A), through upper plastic shoulder washer (E), through both eye bolts, through lower plastic shoulder washer (E), and finally through bottom of hinge bracket. To secure hinge, insert key ring (H) through hole in end of hinge rod. m - - CO CM LOOSEN AT TOP AND BOTTOM OF GATE TO ADJUST GATE WIDTH Use Allen wrench (F) to unscrew set screws on top and bottom of gate to extend gate to fill door

Cardinal Gates CP30

downloaded: 7File size: 88 kb    Manafacture: Cardinal Gates  
Category: Safety Gate

. Be sure nuts are tight. Do not use middle hole for this step. OPTION K Install hinge bracket (A) to wall (stationary side of gate) using Phillips screw (C) beginning 6 11.1" above floor surface. (Use ruler on left edge of this sheet to measure from floor). OPTION: Long screws (J) maybe be used to attach gate to stud through dry wall. C or J Install second screw (C) in top of hinge bracket securing it to the wall. 4. Hang gate by inserting hinge rod (B), through top of mounted hinge brac





Category