Suite 403 San Diego California 92121 Phone: (858) 558-3400 Fax: (858) 558-7050 Toll Free: (877) 97SCOPE MD9200 Owner’s Manual EASY ASSEMBLY MD9200 assembly is easy, and it requires no special tools. The only assembly required is to attach the search coil and lower stem to the upper stem and on to the control box. Fresh batteries can then be installed, and the detector will be ready for use. Please use the following steps for assembly: 1. Depress the button on the single stem, and push it

Text Box: Notes: ? The search coil will not detect without motion. You must move the object since you are not sweeping with the detector at this time. ? If you are suing a coin, the detects it more easily if you hold it so a flat side is parallel with the flat side of the search coil (not the edge). If the detector detects the material, it sounds a tone and the pointer moves to the left (ferrous) or to the right (non-ferrous) while the detector determines the type of meal it is detecting. If the

(The search coil should be parallel with the ground.) Tighten the knobs just enough to keep the search coil from rotating or wobbling. INSTALLING BATTERIES You need six AA batteries to power your detector. Cautions: ? Use only fresh batteries of the required size and recommended type. ? Do not mix old and new batteries, different types of batteries (standard, alkaline, of rechargeable), or rechargeable batteries of different capacities. Text Box: ADJUSTING THE STEM Follow these steps to adjust t