This feature removes all red and green color information from the image (simulating a blue filter), and is useful for color-calibrating the projector or other video components. Save Settings: When you have finished making your adjustments, select Save Settings to store the settings for the current input in the “Custom 1” memory location. Load Saved Settings: To recall stored custom image quality settings, select Load Saved Settings and choose “Custom 1,” “ISF Night” or “ISF Day.” . Projector Sta

Vision 85 Anamorphic Lens Mounting Assembly - Exploded View 1.Use the Pitch Adjustment Screws and Washers (item #6) to attach the Vertical Mounting Brackets (item #5) to the Anamorphic Lens (item #1). 2.Place the lens with the brackets installed on top of (or under, if the projector is inverted) the Base Plate (item #2), so that the two threaded posts at the bottom of the brackets pass through the corresponding slots on the base plate. 3.Secure the lens assembly to the base plate with the Yaw/Z-

Vidikron has equipped the Vision™ Model 100t with our advanced, 3-chip DLP™ technology featuring 1280 x 720 native resolution. This technology is integrated into a LightAmp™ engine developed by Vidikron engineers to produce an amazing 3500 ANSI lumens of light output (CSMS™ Light Output of 78.5 ft-Lamberts) for the ultimate video performance in rooms with high ambient light levels. Vidikron’s exclusive all-digital Imagix™ video processing is integrated into the projector chassis for the most adv

Input Selection Buttons: Use these buttons to select an input source directly or to enter numeric characters, as follows. 12.VIDEO (1) Press to select Composite video input as the source. 13.S-VID 1 (2)/ S-VID 2 (5) (S-Video) Press to select an S-Video input. 14.COMP (Component) (3) Press to select Component SD (480i/576i) video input as the source. 15.HD 1 (4) / HD 2 (7) Press to select a HD (RGBHV or YPbPr component) input. 16.DVI 1 (6) / DVI 2 (8) Press to select a Digital Video input. Aspect

Figure 3-13. Composite, S-Video and Component Video Connections RS-232 Controller . Connection Use the communication cable supplied with the projector to connect a PC or home theater control/automation system (if present) to the RS-232 port on the Vision 65/75; see Figure 3-14. For more information about using this connection, refer to Serial Communications on page 67. S-VID /S-VID123457896D-Sub 9-pin femaleRJ-11 MaleCommunication Cable, RJ-11 male toD-Sub 9-pin female1234YellowYellowRedRedBlack

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents. WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY: The following Vidikron product models are covered under this Limited Warranty: Vision 65, Vision 65/CineWide, Vision 65/CineWide with AutoScope Vision 75, Vision 75/CineWide, Vision 75/CineWide with AutoScope (“Product” individually and “Products” collectively). SERVICE LABOR: Vidikron will p

Please read it carefully and retain it with your other important documents. WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY: SERVICE LABOR: Vidikron will pay for service labor by Vidikron Authorized Service Center when needed as a result of manufacturing defect for a period of two (2) years from the effective date of delivery to the end user (excluding the lamp). PARTS (not including the lamp): Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects

9 Front / Top View ....................................................................................................................................... 10 Rear / Bottom View ................................................................................................................................. 11 Controls and Functions ............................................................................13 Control Panel ..........................................................................

Size and Position Menu 1. Size Presets No Resizing2. Size 0.8663. Height 10004. Pixel Tracking 8585. Pixel Phase 06. Horizontal Shift 3607. Vertical Shift 2628. Reserved9. Reserved0. AdvancedSize and Position In the Size and Position Menu, you can increase or decrease the size of your image, change its proportion (aspect ratio), move the image to a specific area of the screen, and refine other related parameters. Use Size and Position controls to match the image precisely to the screen. Changes

2.LIGHT Press to illuminate the buttons. 3.ON / OFF Press to turn the projector on or off. 4.ENT (Enter) Press to select a highlighted menu item or confirm a changed setting. Note On some remote control units, this button is where the RETURN/EXIT button (item #6) appears here. 5.Cursor Buttons (, , , ) Use these buttons to select items or settings, adjust settings or switch display patterns. When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in