Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Loctite HYSOL P/N 98040

downloaded: 0File size: 295 kb    Manafacture: Loctite  
Category: Camping Equipment

Loctite Company de Mexico, S.A.d e C.V. 1001 Trout Brook Crossing 2225 Meadowpine Boulevard Calzada de la Viga s/n, Fracc. Los Laureles Rocky Hill, CT 06067-3910 Mississauga, Ontario L5N 7P2 Loc. Tulpetlac, C.P. 55090 Ecatepac de Morelos, Edo. de Mexico, Loctite Brazil Mexico Av. Prof. Vernon Krieble, 91 06690-11-Itapevi Sao Paulo-Brazil A Company Loctite is a trademark of Loctite Corporation, U.S.A. Data in the manual is subject to change without notice. . Copyright 2001. Loctite Corporation. A

Loctite HYSOL P/N 98036

downloaded: 0File size: 295 kb    Manafacture: Loctite  
Category: Camping Equipment

• Spots or blobs of adhesive are recommended for work pieces having a large surface area, or which are particularly long. • Applying the adhesive in wavy lines is recommended for gluing textiles or similar materials. • Foam materials, like polystyrene, can be easily bonded to other surfaces. However the adhesive must be applied to the other surfaces, not to the foam. • Use only genuine Loctite® Hysol® adhesives to ensure reliable performance. Loctite® Hysol ® adhesives are non-toxic and non-flam

Loctite CARTESIAN 500

downloaded: 1File size: 955 kb    Manafacture: Loctite  
Category: Robotics

If you create a “Relative” program, shift all points (offset) so that the coordinates of the first point become (0,0,0) after registering the point. Registering a program set to “Moving Amount” The registered coordinates cannot be converted into “Moving Amount.” Register the point in MDImode. Calling points: callPoints Call a point string (defined in customizing mode) with identifier to execute it. Command Category Command Parameter Job Execute Flow Control callPoints Point String Identifier Ca

Loctite CARTESIAN 400

downloaded: 1File size: 955 kb    Manafacture: Loctite  
Category: Robotics

ON Time and OFF Time for “onoffGLED” command can be set using variables or expressions. Output Destination (GLED) ON Time, OFF Time After the onoffGLED command, which turns ON or blinks the LED (Green), is executed, the LED (Green) stays ON or keeps blinking until the reset command, which turns the LED (Green) OFF, is executed. Blinking the LED (Red): onoffRLED .. The following commands are valid for the CARTESIAN series only. The following explains how to turn ON or blink the LED light on the

Loctite CARTESIAN 300

downloaded: 4File size: 955 kb    Manafacture: Loctite  
Category: Robotics

User definition variables, except local variables (variables effective only in defined point job data which are defined by the “declear” command), are defined in the customizing mode. (Refer to the operation manual “Features IV” for a description of the customizing mode.) Boolean type 1 bit variable (Holds only a value of 1 (true) or 0 (false).) Numeric type 8 bytes real type (double type) variable. String type 255 bytes variable Category Type Identifier Description Free Variable boo #mv(1 to 99

Loctite CARTESIAN 200

downloaded: 3File size: 955 kb    Manafacture: Loctite  
Category: Robotics

Be sure to read “For Your Safety” before you use the robot. It will protect you from possible dangers during operation. *After having read this manual, keep it in a handy place so that you or the operator can refer to it whenever necessary. FOR YOUR SAFETY Safety Precautions The precautions stated in this manual are provided for the customer to make the best use of this product safely, and to provide preventive measures against injury to the customer or damage to property. Be sure to follow the

Loctite AC988557

downloaded: 10File size: 440 kb    Manafacture: Loctite  
Category: Air Cleaners

CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE OPERATING THIS EQUIPMENT. If the operator is not fluent in English, the instructions and warnings shall be read and discussed in the operator’s native language, making sure the operator comprehends the contents. This equipment complies with OSHA Standards where applicable. DO NOT exceed the stated maximum working pressure of the airmotor or of the lowest rated component in your system. DO NOT alter or modify any pa





Category