To operate your Voicemail Center 461.2 from a COMfort 2000 system telephone, your COM- fort 2000 must use software release 1.2a (information available via telephone; please refer to the telephone user manual). If you do not have the software version specified, you need to carry out a software update (please refer to the telephone user manual). Usage and Functionality Voicemail Center 461.2 combines the functionality of a traditional answering machine and a professional voicemail solution in a si

Each key has two levels that can be assigned functions. The LED shows the status of the function on the first level. In order to carry out the function on the first level, press the key once. In order to carry out the function on the second level, press the key twice or press the Shift key (using the function key assigned to Shift), and then press the key once. Tip: If you configure Speed dialling keys for internal subscribers,the corresponding + + LEDs show information about the busy or activit

KG, 38162 Cremlingen, 2004 Contents 3 Contents 3 .. .. .. .. .. .. .. .. . ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .6 Functional Description.. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. .6 Scope of Functions. .. .. .. .. .. .. .. .. ..

Accessory and Service components These are available at your authorized dealer or in the Internet shop distriCOM at (Only shipping in Germany.) Safety instructions Safety instructions When installing, connecting and operating the Voicemail Center 461.2 please observe the following instructions: • Connect the connection cable to the appropriate sockets. • Make sure the cables are laid in such a way that accidents cannot occur. Connected cables must not be subject to excessive mechanical strain. •

To print all information, a line width of 112 characters needs to . be configured in the configuration program COMset. If a smaller line size is configured, certain columns will not be printed. If you like to use call charge data with you own software, you have to configure the operation mode of the serial interface to „data exchange with external programs“. PC and printer may not be connected to the serial interface at the same time. Start or stop continuous call data output b7O 50S # secret pa

Attention . Important This symbol warns about possible user errors and circumstances that might lead to functional restrictions or malfunctions. .This symbol marks supplemental advice and tips. Advice Markers/Formats used [...] The text in brackets is a place holder, e.g. [Number] is a place holder for a numerical number. The text connected to a display via thin lines is describing the information content of the display and about the functions operated via softkey. The thick lines connect an act

The InterCom function must be permitted on the called system telephone (see manual of the telephone). Call an internal System Telephone via InterCom Function (Announcement/handsfree Operation) Call system telephone for bf(**) 660n g announcement internal (for Direct Exchange internal telephone number announcement/ dial tone Line Telephone only) of the system telephone handsfree operation or Call system telephone for 661 handsfree operation Special Functions for Business Applications 51 On the ca

This symbol warns of possible user errors and circumstances that might lead to functional restrictions or malfunctions. . . This symbol indicates supplemental information and tips. This symbol indicates a visible result of an action that was just carried out, for example, a display message or a blinking LED. This symbol indicates an audible result of an action that was just carried out, for example, the playback of an announcement. This symbol identifies useful operating information for new user