All rights reserved. Coleman© and are registered trademarks, and Cool Zephyr1M and Cool Air Port™ are trademarks of The Coleman Company, Inc. I Coleman % How to Use and Enjoy Your Coleman® TENT FAN Model 830 Cool Zephyr™ Window Fan Series Carefully read all instructions before use and save for future reference. TO INSTALL OR REPLACE BATTERIES Your new tent fan operates on 6 “D” cell batteries. For longest life, use alkaline batteries. 1. With fan off, open battery housing lid 2. Ins

Warranty void if damage to the product results from the use of a part other than a genuine Coleman ® part. COLEMAN SHALL NOT BE LIABLE FOR DEFECTS THAT ARE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR SERVICE. COLEMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITIONS. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION

Underside: Bottom of bowl undercoated to prevent condensation and deaden sound. Self-rimming: Sink is furnished with appropriate number of clamps to provide a watertight installation. OTHER Drain opening: 3-1/2". Faucet holes: Available with 3 faucet holes only, 4" center to center. Note: Sinks only available in multipacks of 18. Model DPR1812522 SINK DIMENSIONS (INCHES)* Model Number Overall Inside Each Bowl Cutout in Countertop (11/2" Radius Corners) Number of 11/2" Dia. Faucet Holes

Width is front to back. |*4"^«4"«-| 22" 15-3/4" k4"- -4" 3" R y 14" 33" -14"- -2-1/4" R Model DPR1812522 Illustrated -2-1/4" R -15-1/4"- Model DPR1823322 Illustrated 7 7" ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user.

Self-rimming. DESIGN FEATURES Bowl Depth: 7" (large bowl), 5-1/8" (disposer bowl). Coved Corners: 3" vertical and 2-1/4" horizontal (large bowl), 1-3/4" horizontal (small bowl). Finish: Exposed surfaces are polished to a satin finish with highshine bowl radius. Underside: Fully undercoated to prevent condensation and deaden sound. OTHER Drain opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks do NOT comply with ASME A112.19.3-2

Width is front to back. |^4^4^4^ |*.4'^*4'^*4V| Model DDEMR233224 Illustrated Model DDEMR23322R4 Illustrated HOLE DRILLING CONFIGURATIONS tü |*.4'^*-4'^+4V| 4 4 ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user When making a compa

Width is front to back. D-Prefix sinks are packed one per shipping carton. Sink bowl is fully undercoated. D6-Prefix sinks are nested 6 units per shipping carton. Sink bowls are sound deadened on bottom only. D50-Prefix sinks are nested 50 units per shipping carton. Sink bowls are sound deadened on bottom only. 3 4 |*-4"^<- 4"^t- 4"->| -1-1/4" -C ■ E is Bowl Depth Model D225194 Illustrated E is Bowl Depth Model D233194 Illustrated D C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIME

Self-rimming. DESIGN FEATURES Bowl Depth: 6-1/4" (D22519), 6-7/16" (D23319). Coved Corners: Interior vertical and horizontal corners are rounded to a minimum of 2-1/4" radii. Finish: Exposed surfaces are polished to a satin finish. Underside: As described below. OTHER Drain Opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks comply with ASME A112.19.3-2000. These sinks are listed by the International Association of Plumbing and

The surface must be level. Protect generator from heavy dust, sand, dirt, rain, or snow. Do not locate generator near standing water and snow. Make sure area is well-vented. Only responsible adults should use generator. Never let anyone operate generator without proper instructions. NOTE: If oil level is too low, oil alert system will keep engine from starting (See “Oil Alert System,” page 5). Make sure oil level is full before starting. See “Engine Oil,” page 10. Before starting the engine, dis

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. ® Dayton Professional- Duty Electric Generators Description Dayton professional-duty generators are rugged and compact to provide dependable, trouble-free service. The alternators are brushless with revolving fields. Honda gasoline engines provide long life under heavy use. Overhead valves (OHV) prov