Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 2   File size: 2 mb   Manafacture: Accusplit  
Category: Watches
@name

second). • To Reset the timer, press and hold the TIMER button for at least 2 seconds. If turned ON, the Alarm will sound when time expires. The alarm sounds for 5 seconds, or until cancelled by pressing any button. Setting the Timer The timer must be stopped before changing settings. The timer uses a standard setting procedure: • Press and hold “S1” to enter setting mode • Press “S2” to change the field to set • Press “S3” to change the value of the field being set • Press “S4” to exit setting

downloaded: 5   File size: 2 mb   Manafacture: Accusplit  
Category: Watches
@name

The fields are: Time setting Alarm On/Off Time setting. Press S2 until you see digits in the center of the display. Now you can set the timer. Press S3+ (lower right) to increase the timer set point, and press S3– (lower left) to decrease the set point. You will see both the digits and also the dial size increase or decrease. For a setting of 60 minutes, the dial will show completely red. Once you have set the desired time, press S2 once to change Alarm On/Off Setting. You will see the word “O

downloaded: 5   File size: 2 mb   Manafacture: Accusplit  
Category: Watches
@name

• To Stop the timer, press the TIMER button TWICE, in rapid succession (press the button twice within . second). • To Reset the timer, press and hold the TIMER button for at least 2 seconds. If turned ON, the Alarm will sound when time expires. The alarm sounds for 5 seconds, or until cancelled by pressing any button. Setting the Timer The timer must be stopped before changing settings. The timer uses a standard setting procedure: • Press and hold “S1” to enter setting mode • Press “S2” to chang

downloaded: 21   File size: 537 kb   Manafacture: Philips  
Category: Watches

downloaded: 8   File size: 637 kb   Manafacture: Accusplit  
Category: Watches
@name

If the Alarm is OFF, pressing S2 will return you to the Time setting field. In Pre-Alarm set, you will see the word “ON” or “OFF,” plus TWO alarm •3 symbols. The Pre-Alarm symbol (smaller and on the left) will be flashing, along with ON or OFF. Press S3+ or S3– to turn the Pre-Alarm on or off. Pressing S2 again will return you to the Timer setting. Press S4 once (upper left) to exit setting mode. Leaving the watch unattended for 30 seconds in set mode causes it to save any changes and then exit

downloaded: 3   File size: 637 kb   Manafacture: Accusplit  
Category: Watches
@name

The timer can be set anywhere from one minute up to 12 hours. There is both an audible alarm and also a prealarm to let you know when time is running out or has expired. The watch comes from the factory with the timer set to one hour (indicated by 1:00 in the middle of display), and the audible alarms set to OFF. To change the settings, see instructions below. • To Start the timer, press the TIMER button (upper right). • To Stop the timer, press the TIMER button TWICE, in rapid succession (press

downloaded: 4   File size: 637 kb   Manafacture: Accusplit  
Category: Watches
@name

Press and Hold to Reset. #998-310A In the classroom, the Time Timer can be used to set time limits, measure the duration of activities and train students to make better use of available time. Use the Time Timer products to: • Time standardized tests • Monitor math and writing speed tests • Measure study periods and lunch periods • Regulate computer time • Administer duration drills • Show time left to play, get ready or clean up Using Time of Day and Alarm Press MODE (lower left) button until th

downloaded: 31   File size: 72 kb   Manafacture: BALL  
Category: Watches
@name

Automatic Chronograph 3. NEW Triple Date 4. NEW Single-button Chronograph 5. Pulsemeter Scale 6. Tachymeter Scale 7. Telemeter Scale 8. Rotating Bezel 9. Caring for your BALL watch Automatic Watch X = normal position 0 = winding position 1 = date adjustment 2 = setting the time • Manual Winding: If the watch has not been worn for a long period of time, wind the movement before setting the time. Unscrew the crown to position 0, then turn the crown clockwise 20 to 30 times. • Time Setting: To set

downloaded: 5505   File size: 279 kb   Manafacture: Vitek  
Category: Watches
@name@name@name

Follow all warnings and operating recommendations in this manual. Keep this manual for future reference. CAUTION Risk of electric shock DO NOT OPEN Warning: To prevent fire or shock hazard do not expose the appliance to rain or moisture. To prevent shock hazard do not remove the cover yourself. Apply to a service centre for repair and maintenance. This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangero

downloaded: 158   File size: 1 mb   Manafacture: Vitek  
Category: Watches
@name@name@name@name

With every pressing of the MODE button switching between hours and seconds, time and date, zone time and weekday, zone time and seconds appears. 1. To set the current time press and hold the MODE button during 2 seconds, the setting language will be flashing on the display. Use the +/- buttons to select the desired language: English (EN), German (GE), French (FR), Italian (IT), Spanish (SP), and Dutch (DU). 2. Press the MODE button to confirm. The year will be flashing on the display. Use the





Category