FACTORY RECONDITIONED PRODUCTS Limited Warranty DESA Power Tools warrants factory reconditioned products and any parts thereof to be free from defects in material and workmanship for 90 days from the date of first purchase from an authorized dealer provided the product has been installed, maintained and operated in accordance with DESA Power Tools’ warnings and instructions. TERMS COMMON TO ALL WARRANTIES The following terms apply to all of the above warranties: • Always specify model number whe
Improper use of saw can cause severe injury. Keep this manual for future reference. CONTENTS SECTION PAGE Symbol Information............................................................2 Safety Warnings ................................................................. 3 Before Operating Chain Saw.......................................3 Kickback ...................................................................... 3 Pushback and Pull-in ................................................... 4 Chain
2. Checkallitemsforanyshippingdamage.Ifyoufind any damage or if any parts are missing, promptly inform dealer where you bought chain saw. CHAIN SAW NAMES AND TERMS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Handle Located at front of saw body. Front Hand Guard Shield between front handle and guide bar. Protects left hand while using
Remington Power Tools 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A
Allow chain to cool down. Readjust chain tension. FILLING OIL TANK 1. Remove oil cap. 2. Fill oil tank with SAE #30 motor oil. Note: For temperatures below 30°F, use SAE #10 oil. For temperatures above 75°F, use SAE #40 oil. 3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank. 4. Wipe off excess oil. Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seepage. OPERATING CHAIN SAW WARNING: Read and
Keep this manual for future reference. ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a StopparaarrEt Do Not rEtUrN proDUct to StorE. caLL 1-800-626-2237 For tEcHNIcaL aSSIStaNcE For more information, visit This manual is your guide to safe and proper operation of the saw. SavE tHESE INStrUctIoNS. Keep your purchase receipt for warranty coverage. No DEvUELva EL proDUcto a La tIENDapara mas
6. After each cutter is sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain. 7. Move to other side of chain and repeat process. Filing Cutter Depth Gauges The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpening, reset cutter depth gauges. 1. Place depth gauge tool (.025") firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 21). 2. Use medium flat file. File
Improper use of saw can cause severe injury. Keep this manual for future reference. ENGLISH STOPSTOP PARAPARA ARRETARRET STOPSTOP PARAPARA ARRETARRET DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit This manual is your guide to safe and proper operation of the saw. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Para mas informacion, PARA AYUDA TECNICA LLAME AL 1-800-626-2237 Es
Assembly is not needed on these models. See Saw Chain Tension Adjustment. 1. Lay chain out flat. 2. Loosen and remove guide bar nuts and sprocket cover. 3. Loosen and remove drive sprocket screw or remove E-ring from shaft (see Figure 4). Remove sprocket support. 4. Install guide bar onto saw body. Assemble center slot of guide bar onto guide bar bolts. 5. To replace sprocket support, repeat step 3 in reverse order. Firmly tighten drive sprocket screw with #2 Phillips screwdriver (if applicable)
Improper use of tiller can cause severe injury. Keep this manual for future reference. STOPSTOP PARAPARA ARREARRETTSTOPSTOP PARAPARA ARREARRETT DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit This manual is your guide to safe and proper operation of the tiller. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Para mas informacion, PARA AYUDA TECNICA LLAME AL 1-800-626-2237 Este
• 5/32" round file • Depth gauge tool • File guide • Vise • Medium sized flat file Sharpening Cutters Use file guide for 30° filing. 1. Adjust chain for proper tension (see Saw Chain Tension Adjustment). 2. Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain. 3. Press 5/32" round file (attached to file guide) into groove between top plate and depth gauge on chain. File guide should rest on both top plate and depth gauge (see Figure 20). Note: File at midpoint of guide bar. Filin