9 11 12 13 15 14 A A1 1 2 3 5 6 7 4 2 3 4 1 3 1 2 4 1 2 2. 3. 4. 5. 6. 7. A B C D F G H I 1 2 3 E A A1 5 6 7 9 8 10 1 2 4 3 3 1 2 4 5 6 7 8 10 103148 3 OWNER’S MANUAL 3 2 1 1 45° 3 5 cm 4 5 2 1 1 2 1 2 5-10 cm 15 cm 1 3 4 J 2 L M N O P Q K R 5 2 4 1 7 3 2 6 S U 2 3 1 ECSp005 1 T 4 1 5 cm 2 FILE HOLDER 2 4 5 1 3 ® ELECTRIC CHAIN SAW SYMBOL IDENTIFICATION Call Outs For Figure A 1. Read instruction manual 2. Do not expose to rain or use in wet conditions 3. Remove plug immediately if cable is damag

Improper use of saw can cause severe injury. Keep this manual for future reference. CONTENTS SECTION PAGE Symbol Information............................................................2 Safety Warnings ................................................................. 3 Before Operating Chain Saw.......................................3 Kickback ...................................................................... 3 Pushback and Pull-in ................................................... 4 Chain

Improper use of saw can cause severe injury. Keep this manual for future reference. ® ® ELECTRIC CHAIN SAW SAFETY WARNINGS Do not assemble or handle guide bar or saw chain while connected to a power source. 1. Keep the work area clean. Cluttered areas invite accidents. 2. Do not let the chain saw get wet. Don’t use the chain saw in the rain or in damp or wet locations. Keep the work area well lit. 3. Keep bystanders and animals out of the work area. 4. Store the chain saw in a safe place, out of

INSTITUTE INC. ™ Model 494 Powder Actuated Fastening Tool Operating Instructions ® ANINDEPENDENT LABORATORY TESTINGFOR PUBLICSAFETY REMINGTON® POWDER ACTUATED TOOL MANUFACTURERS. INSTITUTE INC. ™ Model 494 Powder Actuated Fastening Tool Operating Instructions IMPORTANT: Read this manual and all labels carefully before operating your powder actuated tool. This manual should always accompany the tool and be transferred with it upon change of ownership. INDEX Warning: Safety Precautions............

For additional information see owner’s manual or call 1-800-858-8501. Make sure chain moves freely around guide bar then tighten nut. LOOSEN Loosen nut... If chain becomes loose around guide bar, allow chain to cool then... TIGHTEN Turn chain tensioning screw clockwise to tension saw chain... TIGHTEN WARNING: Unplug saw and allow chain to cool before tensioning. New saw chains will stretch. Check chain tension frequently when first used and tighten when chain becomes loose around guide bar. Pull

Make sure your footing is firm. Keep feet apart.Divideyourweightevenlyonbothfeet. Follow directions below to fell a tree. Before Felling a Tree 1. Before felling, inspect tree. Make sure there are no dead limbs or branches that may fall on you. Study natural lean of tree, location of larger branches, and wind direction. This will help you judge which way tree will fall. 2. Clear work area around tree. 3. Plan and clear a retreat path before felling. Make retreat path opposite to planned directio

Improper use of tiller can cause severe injury. Keep this manual for future reference. STOPSTOP PARAPARA ARREARRETTSTOPSTOP PARAPARA ARREARRETT DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit This manual is your guide to safe and proper operation of the tiller. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Para mas informacion, PARA AYUDA TECNICA LLAME AL 1-800-626-2237 Este

Allow chain to cool down. Readjust chain tension. FILLING OIL TANK 1. Remove oil cap. 2. Fill oil tank with SAE #30 motor oil. Note: For temperatures below 30°F, use SAE #10 oil. For temperatures above 75°F, use SAE #40 oil. 3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank. 4. Wipe off excess oil. Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seepage. OPERATING CHAIN SAW WARNING: Read and

2. Checkallitemsforanyshippingdamage.Ifyoufind any damage or if any parts are missing, promptly inform dealer where you bought chain saw. CHAIN SAW NAMES AND TERMS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Handle Located at front of saw body. Front Hand Guard Shield between front handle and guide bar. Protects left hand while using

Keep this manual for future reference. ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a StopparaarrEt Do Not rEtUrN proDUct to StorE. caLL 1-800-626-2237 For tEcHNIcaL aSSIStaNcE For more information, visit This manual is your guide to safe and proper operation of the saw. SavE tHESE INStrUctIoNS. Keep your purchase receipt for warranty coverage. No DEvUELva EL proDUcto a La tIENDapara mas