The original (OR) and a maximum of 7 target languages can simultaneously be transmitted on different carrier frequencies by narrow band frequency modulation. The transmitted signals are received by the SIR 320 receiver and can then be monitored with headphones. With miniature switches on the front panel the frequency band can be chosen and the channels can be switched ON or OFF. With a rotating switch it is possible to assign up to 32 transmission channels. 3 infrared transmitter diodes allow

• Unbalanced audio input for system extension • Record output for direct connection to a recording system • RS 232 interface allows the operation of the discussion system via PC or other available media control systems such as AMX®, Crestron®, Cue® etc. to enable complete conference room control. Germany United States Great Britain Theresienstr. 8 56 Central Ave. 17 Albert Drive D-74072 Heilbronn Farmingdale, NY 11735 Burgess Hill RH15 9TN Tel. +49 (0 )71 31 / 6 17-0 Tel. +1 (631) 293-3200 Tel.

The -55 dB / 4 7 kQ interpreter console has been designed for two interpreters with 7 5 V supply who take turns. Each interpreter can connect one headset or Frequency response.............. 70 - 18,000 Hz (-3 dB) one microphone and headphone to the console. For powering, T HD < 0 15% the console does not need a control unit; it is powered via Signai-to-nojse ratio > 72 dB (A) the supplied p°wer supply unit. Cross-talk attenuation . . . . . . . . . . . . > 68 dB / 1 kHz The audio channels f

You could either injure yourself or others or damage the microphone. • Do not blow into the microphone. In a condenser microphone this could damage the transformer. It is preferable to carry out a speech trial. • When using wired microphones always ensure that the microphone cable is laid so that it does not present a trip hazard. Application Applications for the MC 910 / 930 / 950 include broadcasting, recording and film studios and on stage. The microphones are suitable for miking choirs, solo

. . . . . . . . . . . . . .Order # MC 930 Stereo-Set with 2 matched GST 500 Microphone stand, 3/8", MC 930, 2 x EA 19/25 and height 0.85 - 1.60 m, with 2 x WS 53 in a plastic case . . . .471.968 telescopic G 500 boom . . . . . . .406.252 MC 950 Condenser microphone, ST 400 Microphone stand, 3/8", supercardioid, with MKV 9 height 0.90 - 1.65 m . . . . . . . . .421.286 microphone clamp with ST 500 Microphone stand, 3/8", 3/8" - 5/8" internal thread, height 0.85 - 1.60 m . . . . . . . . .406.643 fo

. . . . . . . . . .421.294 english 12 13 Technical Specifications Technical Specifications MC 910 MC 930 MC 950 Transducer type: Condenser Condenser Condenser Operating principle: Pressure Pressure gradient Pressure gradient Frequency response: 30 - 20,000 Hz 40 - 20,000 Hz 40 - 20,000 Hz Polar pattern: Omnidirectional Cardioid Supercardioid Open circuit voltage at 1 kHz: 25 mV/Pa = -32 dBV 30 mV/Pa = -30.5 dBV 40 mV/Pa = -28 dBVNominal impedance: 180 . 180 . 180 . Load impedance: 1000 . 1000 .

The microphone button operates normal switching on and off of the microphone. The chairman does not depend upon the limited number of open microphones (NOM). Using the priority button the chairman can intervene into the discussion and mute or clear the activated delegate microphone units depending on the system configuration. Using the clear button all activated delegate microphone units are switched off. The Ready-to-Talk status of the microphone is indicated by the illuminated red ring and th

48 x 13 mm: 1 line / 8 characters; height of character: 7 mm • Phone: internal • Clock • Menu buttons to operate the menus • Buttons (on the right hand side) to navigate through the menus and to control the headphone volume • 10 function buttons • Language selector • 2nd language selector for integrated loudspeaker • Big microphone button • Integrated 2-way loudspeaker • Bottom provides conference bus sockets • Rugged housing DESCRIPTION The MCS-D 2074 with removable gooseneck microphone is conf

48 x 13 mm: 1 line / 8 characters; character height: 7 mm • Five voting buttons • Four navigator buttons for channel selection and volume control of a connected headphone • Microphone button for switching the microphone on and off and requesting to speak • LED on the microphone button and LED strips on both sides of the housing indicate that the participant is requesting to speak or the microphone unit is in ready-to-talk mode • NetRateBus conference sockets (push-pull) for connection in the MCS

mixing console) with separate volume control • Switchable phantom power (27 V) • Outputs: - electronically balanced Master Stereo output with 3-pin terminals - adjustable via software - unbalanced Master Stereo output with RCA / phono connection - Record output microphone master (mono) with RCA / phono connection - electronically balanced Sub stereo output with 3-pin terminals • Each input can be routed as Master and/or Sub • RS 232 interface with 9-pin Sub D connection for external ope