Votes - 3, Average rating: 3.7
(
)
)
|
Photos and specs Beyerdynamic MC 910 |
manual abstract
You could either injure yourself or others or damage the microphone. • Do not blow into the microphone. In a condenser microphone this could damage the transformer. It is preferable to carry out a speech trial. • When using wired microphones always ensure that the microphone cable is laid so that it does not present a trip hazard. Application Applications for the MC 910 / 930 / 950 include broadcasting, recording and film studios and on stage. The microphones are suitable for miking choirs, solos, woodwind and brass instruments, piano and string instruments or for overheads on drums. When the microphones are used outdoors or for close miking, we recommend using the WS 101 wind shield which can be fitted on the microphone. Connection The MC 910 / 930 / 950 provide a 3-pin XLR connector and can be connected to any microphone input with phantom power supply (11 - 52 V). For connecting cables, please refer to “Optional Accessories”. Installation As supplied the MC 910 / 930 / 950 include the MKV 9 microphone clamp for stands with 3/8" thread. For stands with a 5/8" thread, the thread adapter can be unscrewed using a small coin. To attach to the swivelling MKV 9 the MC 910 / 930 / 950 should be pressed between the two elastic jaws of the clamp. How to select the Pre-attenuation For higher sound pressure levels a pre-attenuation of 15 dB can be applied with the right slide switch on the front of the microphones (imprint: -15 dB). How to select the Low-cut Filter If a directional microphone (pressure gradient) is used for close vocal miking the low frequencies are pre-emphasised; this is known as proximity effect. To compensate this effect, the MC 930 and MC 950 provide a switchable low-cut filter on the front (left) below 250 Hz with 6 dB/octave. With the MC 910 the sound characteristic of the microphone can be changed with this switch. Maintenance For cleaning metal surfaces, use a soft, damp cloth using only gentle cleansing agents (such as washing-up liquid). Make sure that no water drops into the microphone and do not use any solvent cleansers. Clean the WS 101 wind shield in clear, warm water. It should be completely dry, before it is used again. Service Servicing must be carried out by qualified service personnel only. Dismantling the microphone yourself will invalidate the guarantee. Versions Model Description . . . . . . . . . . . . . . .Order # MC 910 Condenser microphone, omnidirectional, with MKV 9 microphone clamp with 3/8" - 5/8" internal thread, for microphone shaft diameter 19 - 21 mm . . . . . . . . . . . . . . . .499.986 MC 930 Condenser microphone, cardioid, with MKV 9 microphone clamp with 3/8" - 5/8" internal thread, for microphone shaft diameter 19 - 21 mm . . . . . . . . . . . . . . . .465.267 english 10 11 Model Description . . . . . . . . . . . . . . .Order # Model Description . . . . . . . . . . . . . . .Order # Description . . . . . . . . . . . . . . .Order # MC 930 Stereo-Set with 2 matched GST 500 Microphone stand, 3/8", MC ...
Other models in this manual:Headphones and Mics - MC 930 (631.7 kb)
Headphones and Mics - MC 950 (631.7 kb)