Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  

Transition Networks C/E-100BTX-FRL-03

downloaded: 0File size: 58 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

Straight Through Cable 1 2 1 2 3 6 3 6 The two active pairs in a 100BASE-TX network are pins 1 & 2 and pins 3 & 6. Twisted Pair #1 Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & Twisted white/orange) for the active pins. Pair #2 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result damage to the public telephone network. Der Anschluss dieses Gerates an ein offentlickes Telekommunikation

Transition Networks C/E-100BTX-FRL-03(SC)

downloaded: 1File size: 58 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

100BASE-FX Singlemode Fiber 100BASE-TX Copper C/E-100BTX-FRL -03 P 100BASE-FX 100BASE-TX Fast Ethernet C/100BTX- FRL- 03(SM) Power Illuminated green LED indicates Status LEDs AC power. SDF Signal Detect/Fiber: Steady is connected to device. SDC Signal Detect/Copper: port is connected RXC Receive/Copper: are seen RXF Receive/ seen P E-FX 100BA 100BASE-FX CABLE CONNECTIONS • Be certain that the correct mode and wavelength fiber cable is used for single- mode and/or for multimode fiber cable instal

Transition Networks C/E-100BTX-FRL-03(SM)

downloaded: 1File size: 58 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

±10% @ 10 MHz Maximum Cable Distance: 100 meters (330 feet) 100BASE-FX CABLE SPECIFICATIONS SINGLEMODE Fiber-optic Cable Recommended: Fiber-optic Transmitter Power: Fiber-optic Receiver Sensitivity: Wavelength: Bit error rate: Maximum Cable Distance: MULTIMODE Fiber-optic Cable Recommended: Optional: Fiber-optic Transmitter Fiber-optic Receiver Wavelength: Bit error Maximum 9 .m singlemode fiber min: -15.0 dBm max: -8.0 dBm min: -32.5 dBm max: -8.0 dBm 1300nM . 10-9 20 kilometers 62.5 / 125 .m m

Transition Networks CGETF10XX-10X

downloaded: 1File size: 135 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

The CGETF10xx-10x is also designed to be installed in the Transition Networks PointSystem™ chassis. Part Number Port One - Copper Port Two - Duplex Fiber-Optic CGETF1013-105 RJ-45 1000Base-T SC, 1000Base-SX, 850 nm multimode 100 m (328 ft)* 300 m (984 ft)* (62.5/125 .m cable) 500 m (1,640 ft)* (50/125 .m cable) CGETF1014-105 RJ-45 1000Base-T SC, 1000Base-LX, 1310 nm single mode 100 m (328 ft)* 10 km (6.2 miles) * CGETF1015-105 RJ-45 1000Base-T SC, 1000Base-LX, 1310 nm single mode 100 m (328 ft)*

Transition Networks CPSFM-200

downloaded: 3File size: 84 kb    Manafacture: Transition Networks  
Category: Computer Accessories

The CPSFM-200 may be installed in either the AC-powered or the DC-powered, 18-slot or 19-slot, PointSystem™ chassis. The drawing below shows the CPSFM200 installed in the back of a AC-powered PointSystem™ chassis. 0 CPSFM-200 Fan Module AC-Powered PointSystem Chassis NOTE: The CPSFM-200 fan module is required in PointSystem™ applications where the ambient temperatures approach 60°C. Installation . . . . . . . . . . . . . . . .2 Technical Specifications . . . . . .3 Contact Us . . . . . . . . . .

Transition Networks CPSVT26XX

downloaded: 1File size: 151 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

Transition Networks MEDIA CONVERTER A-CF-01

downloaded: 9File size: 44 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

TN PN Requirement Location 3517 240 volts, 50 hertz United Kingdom 3516 230 volts, 50 hertz Europe 3518 120 volts, 60 hertz USA/Canada/Mexico 3514 100 volts, 50-60 hertz Japan 3515 240 volts, 50 hertz Australia CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerates an ein offentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstosst gegen

Transition Networks MEDIA CONVERTER A-CF-01(SM)

downloaded: 0File size: 44 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

Use only correctly (straight through or crossover) for site. Cable Pair #1 Pair #1 connections between an ATM switch and the media converter must dedicated wire pairs (such as Twisted Twisted be configured as straight through. Cable connections between the Pair #2 Pair #2 blue/white & white/blue, media converter and a NIC must be configured as crossover. orange/white & white/orange) for the active pins. Connectors for unlike devices Connectors for like devices 12 78 12 78 Installation Notes • KE

Transition Networks MEDIA CONVERTERS E-100BTX-FRL-01

downloaded: 7File size: 79 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformität. Compliance Information UL Listed C-UL Listed (Canad

Transition Networks MEDIA CONVERTERS E-100BTX-FRL-01(SC)

downloaded: 1File size: 79 kb    Manafacture: Transition Networks  
Category: Receivers & Amplifiers

Media converter models are selected according to the fiber mode and fiber connector required at the site. Multimode fiber-optic cable can use either an ST connector (E-100BTX-FRL-01) or an SC connector (E-100BTX-FRL-01 (SC)). Singlemode fiber (E-100BTX-FRL-01 (SM)) uses only an SC connector. All media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode. E-100BTX-FRL-01 Provides an RJ-45 unshielded twisted pair '100BASE-TX





Category