2 Do not touch hot surfaces. Always use oven mitts when handling hot materials, and allow metal parts to cool before cleaning. Allow the breadmaker to cool thoroughly before putting in or taking off parts. 3 When unit is not in use and before cleaning, unplug the breadmaker from wall outlet. 4 To protect against risk of electrical shock, do not immerse the appliance or plugs in water or other liquids. 5 Close supervision is always necessary when this or any appliance is used by or near children,

This will damage the finish. 2. Run the iron over an all-cotton cloth to remove any residue. USING THE SELF-CLEANING FEATURE You should use the Self-Cleaning feature once a month to maintain the optimal performance of your iron. Turn off iron following instructions above. To use the Self-Clean feature: 1. Move the Variable Steam Lever back and forth from (Dry) to (Max Steam) several times to remove debris and minerals from the Variable Steam Valve. This keeps water flowing into the steam chamber

WARNING: The Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use.” MOTION SMART® AUTO-OFF FEATURE (select models only) When the iron is plugged in, the Power Indicator will light steadily, indicating that there is power to the iron. IF YOU LEAVE THE IRON: • in a horizontal position without moving it, or accidentally tip the iron over, it will automatically stop heating after 30 seconds. The Power Indicator will blink to let y

The Power Indicator will blink to let you know that the iron has stopped heating. IMPORTANT: The Power Indicator will continue to blink until the iron is unplugged or reset. TO RESET THE IRON: Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will stop blinking and the iron will start heating again. WARNING: Motion Smart® Auto-Off is a safety feature, not a recommended means for turning your iron off. See “Caring for Your Iron After Use” for information on turning

To reduce the risk of death by electric shock: 1. Do not install or store appliance where it can fall or be pulled into a tub or sink. 2. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 3. Do not use while bathing. 4. Do not place in or drop into water or other liquid. 5. If hand unit falls into water, turn unit off immediately. Do not reach into water. WARNING – To reduce risk of burns, electrocution, fire or injury to persons: 1. Close super

Sunbeam ® is a trademark of Sunbeam Corporation or its affiliated companies. Distributed by Sunbeam Products Inc., Delray Beach, Florida 33445. ©1998 Sunbeam Corporation ou ses societes apparentees. Tous droits reserves. Sunbeam ® est une marque de Sunbeam Corporation ou de ses societes apparentees. Distribue par Sunbeam Products Inc., Delray Beach, Florida 33445. ©1998 Sunbeam Corporation o sus corporaciones afiliadas. los derechos reservados. Sunbeam ® es una marca de Sunbeam Corporation o de

Inspect the cord frequently for damage. Stop use immediately if damage is visible or unit stops or operates intermittently. SAVE THESE INSTRUCTIONS 1 MOUNTING INSTRUCTIONS For use on sheetrock or wood walls only. The Sunbeam ® Wall Mount hair dryer is designed for installation on sheetrock or wood walls only. To mount onto wall, be sure there are no hidden electrical circuits or pipes in the mounting location. FOLLOW THESE INSTRUCTIONS 1. Remove wall bracket from the unit. MOUNTING INSTRUCTIONS