The last measured temperature is constantly displayed on the LCD. Note that the last measured spa temperature displayed is current only when the pump has been running for at least 2 minutes. Press the “Warm” or “Cool” button to display and adjust the set temperature. After three seconds, the LCD will automatically display the last measured spa temperature. Jets Touch the “Jets” button once to activate the low speed of the pump and again for the high speed. Press the “Jets” button again to turn o

Please call your local Dynasty Spa Dealer if you have any questions or problems. If they are unavailable, please feel free to call the Dynasty Spas Customer Service Group at: 800-951-6224. Dynasty Spas Operator’s Guide • TABLE OF CONTENTS OWNER’S INFORMATION ......3-4 FILTER MAINTENANCE ..........15 • Dealer Information • Installer Information • President’s Letter SAFETY INSTRUCTIONS ......5-6 • Warnings • Dangers BASIC INFORMATION ..............7 • Do’s and Dont's SET-UP AND DELIVERY GUIDELINES

To activate the LED lights, press the "LIGHT" button on the topside panel one time. To advance to the next color/display setting, press the "LIGHT" button twice in a row. The LED's will go off with the first press, then back on in the next setting with the second press. If the LED's remain off for more than 5 seconds, the color/display sequence will reset and start back at the beginning the next time the "LIGHT" button is pressed. The color/display sequence is: Setting #1 LED's light up and slow

If a power-up occurs, system returns to default setting (.F). Turning the light on: Press Light to turn light on. Pressing a second time turns light off. A built-in timer automatically turns light off after 2 hours, unless manually deactivated first. The "Light" indicator is displayed when light is on. Fiber Box Option: If spa has an optional fiber box, press Light key to turn fiber box (motor and light) on. Pressing a second time turns fiber box off but leaves light on. A third time turns both

The Priming mode will last for less than 5 minutes (press "Temp" or "Set" to skip Priming Mode) and then the spa will begin to heat the spa and maintain the water temperature in the Standard mode. Your system has a 24-hour circ pump. The circ pump and the ozone generator run continuously with the exception of shutting off for 30 minutes at a time in hot environments. Temp/Set (80°F - 104°F / 26°C - 40°C) The start-up temperature is set at 100F°/37°C. The last measured temperature is constantly d

Follow action required for “” message. Heating capability of the spa will not reset automatically; you may press any button to reset. Check water level in spa. Refill if necessary. If water level is okay, make sure the pumps have been primed. Press any button to reset, or this message will automatically reset within 15 minutes. If problem persists, contact your dealer or service organization. Follow action required for “” message. Spa will not automatically reset. Press any button to reset. No m

"Mode" Key "Soft" Key 1, "Plus" Key increases selects mode of 2, 3, 4 "Ok" Key parameter setting operation: Spa, Operation Mode Menu title AM/PM (.F/ .C) L LLi iig ggh hht ttt icons Information Display "Right" Time, temperature Multi & message digits function Key Pump Progress bar icon icons "Left" Multifunction Key "Minus" Key "Next" Key goes to Status icons L LLo ooc cck kkk icon Service icon goes back to previous decreases par-menu page parameter setting or ameter setting increases parameter

Note that some functions require the use of the K-4 keypad (10 keys). * Starting Pump 1: Turning the light on: Press Pump 1 to turn Pump 1 on at low speed. Press a second time to turn Pump 1 to high speed. A third time turns Pump 1 off. A built-in timer automatically turns pump off after 20 minutes, unless it has been manually deactivated. The "Pump 1" indicator lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed. Starting Pump 2: Dual-speed pump system: Press Pu

Not a bug but a feature! Our Smart Winter Mode protects your system from the cold by automatically turning the pumps on for one minute several times a day to prevent water from freezing in pipes. Water temperature is displayed. Water temperature in the spa has reached 112.F (44.C). Do not enter the water! Allow water to cool down. The system will reset au- tomatically when water reaches 109.F (43.C). Call your dealer or service supplier if problem persists. 3 flashing dots are dis- played. A pro

Water temperature is displayed. Water temperature in the spa has reached 112.F (44.C). Do not enter the water! Allow water to cool down. The system will reset au- tomatically when water reaches 109.F (43.C). Call your dealer or service supplier if problem persists. 3 flashing dots are dis- played. A problem has been de- tected. Do not enter the water! Check and open water valves. Clean filters if nec- essary. Check water level. Add water if needed. Shut power off and power your spa up again to r