UNDER-COUNTER INSTALLATION Fig. 2 Your compactor has been designed to require a minimum of space whether free-standing or built-in. Only 12” wide x 20” deep, your compactor is smaller than most on the market. (Fig. 2) To install compactor under counter, use Figure 2 to determine the cutout size. Back up compactor with a 2 x 4 to prevent unit from shifting backwards due to repeated closing of compactor drawer. The power outlet should be installed per electrical code near the center of the opening
FEATURES • Attractive white finish • Vertical louvers - disperse heat evenly • Front-mounted, snap action, bimetallic thermostat (Model 112 only) • Heavy-duty, steel sheathed, plate-finned element • Factory-wired for 240 VAC, 1500W • Field-convertible to operate on 120 VAC, 750 or 1500W • Mounts into standard kickspaces beneath cabinets, vanities, counters, stairways, etc. ACCESSORIES (purchase separately) • Model 86W Line-Voltage Thermostat • Model 59W / 59V 60 Minute Timer • Model 6
All electrical work must be done in accordance with local and/ or National Electrical Code as applicable. For safety, this product must be grounded. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified electrician. 2. Turn off power at service entrance before installing wiring, servicing, or cleaning this product. 3. Do not install heater upside down or sideways. Heater must be located in the horizontal position. 4. Do not recess louvered face of