E-A055 10/05 P4 BCR Barcode Reader Product traceability with 2D & 1D barcode reading! • Compact self-contained Barcode Reader - no external controller necessary • Reads linear (1D) and DataMatrix (2D) barcode types • Two housing styles and multiple mounting brackets for easy installation • Convenient, 12-pin connector ensuring smooth integration into the machine control system • Simple, remote TEACH capability for quick reconfiguration (product change) • Separate video output allows dir

• Retroreflective mode sensor has 250 m range. • Ranges with diffuse mode sensor are up to 10 m for white, 7 m for gray and 3 m for black targets. • Models are available with discrete output only or with discrete and analog output. • RS-422 or SSI compatible serial connections are provided. LT3 page 244 • Exceptionally accurate advanced time-of-flight sensing technology provides precise measurements over long ranges. • Retroreflective mode sensor has 50 m range. • Ranges with diffuse mode sensor

bannerengineering.comFixed-field models offer a superior alternative to proximity sensors. .Available in 25, 50 and 75 mm models for higher performance and greater range .Detects objects directly in front of another surface, ignoring objects and backgrounds beyond the fixed range .Features high excess gain for reliable detection of objects with low reflectivity .Can be recessed mounted to prevent damage by contact with work pieces .Offers Banner quality and priced lower than competitive 12 mm ph

Invisible mounting under the floor. ▲ Loading Dock Signal arrival of trucks at loading docks, trigger automated dock levelling systems. Close doors for security after truck leaves. *»->— S18M Housing Style ▲ Car Wash Entry/Exit Detect if vehicles are present in the wash tunnel, collision avoidance, trigger special wash units, open/close doors. ▲ Drive-In Alert personnel that vehicle is present at order point or collection counter. Multiple M-GAGEs can be used for drive-in timing systems.

Description: The outer and inner diameter of each tyre is determined. The controller determines if the tyre is one of two required sizes, and directs it down the corresponding conveyor. If the tyre is found to be of neither size, it is sent to a reject bin. 3-Digit Diagnostic Display Bi-Colour Zone Indicators Dip Switch Configuration Alignment/ Blanking System Status Modbus Activity Included software contains more advanced settings Objective: Determine the diameter of a log before it

For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767. Sensing Mode Range LED Model* Opposed Emitter 3 m (10') Infrared 880 nm SMA31E Opposed Receiver SM2A31R Opposed Emitter - Long Range 30 m (100') SMA31EL Opposed Receiver - Long Range SM2A31RL Opposed Emitter Clear Plastic Detection 0 to 300 mm (0 to 12") Actual range varies, depending upon the light transmission properties of the plastic material being sensed. Visible Red 650 nm SMA31E

The MINI-BEAM Expert is available in many sensing modes to solve virtually every sensing application in your plant. Sensing modes include: regular and wide angle diffuse (proximity mode), polarized retroreflective, retroreflective mode clear object detection, convergent, plus infrared and visible beam fiber optics. See page 6 for available models and specifications. Retroreflective Convergent Fiber Optic The world’s most popular photoelectric is now the world’s smartest.The world’s most popular

Q12 Miniature Sensor • Rated IP67 for use in the widest range of locations and applications Overmoulded design provides enhanced durability and shielding • Robust metal-lined mounts with standardised location on all models • Powerful sensors suitable for extremely confined areas • Opposed, retro-reflective (polarised & non-polarised) and fixed-field sensing modes • Precise cutoff backgroundsuppression available in three fixed-field models • Mounting flexibility directly on and inside man

To facilitate cutting, a Banner model PFC-1 cutting device is supplied with this fiber. Cut the fiber as follows: 1) Locate the "control end" of the fiber (the unfinished end). Determine the length of fiber required for the application. At the control end of the fiber, separate the two fibers. Lift the top (blade) of the cutter to open the cutting ports. Insert one of the control ends through one of the two small cutting ports on the PFC-1 cutter so that the excess fiber protrudes from the back

sensor • Complete range • High performance • Competitive price • Easy installation • Easy diagnostics • Resistant to harsh environments • M12 connector • Many accessories • Easy set-up A universal sensor with simplified set-up! QS18 photoelectric Easy set-up • Potentiometer or Teach Function for Expert version • Easy adjustment featuring a specially moulded stop which prevents over-adjustment damage; no extra tools needed Easy diagnostics • Bright LED operating status indicator