If the refrigerator changes ownership, be sure this manual accompanies refrigerator. Consumer Information Line 1-800-843-0304 Contents Electrical Requirements_ Model Identification_ Setting Controls Temp-Assure™ _ Refrigerator and Freezer Model Diagrams_ Refrigerator Features Refrigerator Shelves Deli Chiller.- Crisper Drawers _ Utility Rack (some models) Egg Bucket 2 3 4 4 6 8 8 10 12 12 12 Snaccess Bin (some models) _ Dairy Module and Food Storage Container System (some m

Place the tube in a shallow pan or in a nearby floor drain. 5. Remove defrost drain plug (select models) from the bottom front of the freezer liner so the defrost water will flow into the drain tube. • Empty pan as often as necessary during the defrost. NOTE: Some models do not have a drain plug and water collecting from the defrost will have to be removed manually. 6. To speed defrosting, pans of hot water may be placed on shelves in the freezer. • Do not bend, scrape or try to move shelves. Sh

5. Damages to finish after installation. 6. Replacement of light bulbs and/or fluorescent tubes (on models with these features). EXCLUSIONS This warranty does not cover the following: 1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. 2. Servic

This appliance is designed for domestic use only. Specialised companies that are qualified to do so by the manufacturer must carry out service and repairs including repairing and changing the power cord. Accessory parts supplied by them should be used only for repairing. Otherwise the appliance can be damaged or can cause other damage or injury. The appliance is out of circuit only in that case if the plug is removed from the socket. Before cleaning and maintenance always unplug it (do not get i

• Next menu – Displays Menu 2. Menu 2 • Main menu – Returns display to the Main menu. • System flush – Removes all oil and refrigerant from an A/C system. This mode is often used prior to retrofitting a system to R-134a. • Tank refill – Overrides the automatic tank refill function of the MAC2000 and transfers refrigerant from the external source tank to the internal storage tank. • System set-up – Sets up certain operating parameters in order for the MAC2000 to operate correctly. The set-up info

– 89/336/EWG dated 3 May 1989 (including guideline change notice 92/31/EWG) Fix cover (C) on guide (A) until it clips into place. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with o 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied. Sh

If the floor is not level it is necessary to shim the rear wheels onto a piece of plywood or other shim material so refrigerator is level. A WARNING To avoid electrical shock which can cause severe personal injury or death, disconnect power outlet from main power supply before installing or servicing refrigerator. Prepare refrigerator for delivery Some installations may require door removal to get the refrigerator into the home. 1. Remove toe grille. 2. Remove top hinge cover and top hin