INTRODUCTION ...................................................................................................................................3 2. PACKAGE CONTENTS ........................................................................................................................3 3. SYSTEM REQUIREMENT ...................................................................................................................3 4. INSTALLATION INSTRUCTIONS ............................................

Make sure the antenna is connected to the connector on the rear of your TV as shown above. 2. Set your television to the lowest channel number available in your area, which is usually the most difficult station to receive. 3. Fully extend the rabbit ears, and place them as horizontal as space permits. You may find that you do not need to extend the rabbit earsall the way for good performance. 4. Adjust the rabbit ears, and rotate the entire antenna until you find the position that gives you the

Before you begin your installation, please read these instructions carefully and keep these instructions for future reference. INTRODUCTION The 24746 Futura™ Outdoor TV Antenna is specially designed for digital terrestrial broadcasting reception. The compact and stylish housing can be placed in low visibility locations. Features: • Compact and Stylish Design • Digital HDTV Ready Package Content: • Futura™ Outdoor Antenna • Adjustable Wall Mount Bracket • Instruction Manual Product Description: T

SETUP Used to program the remote or to search through codes. TV, VCR, DVD•AUX, CBL•SAT The TV, VCR, DVD•AUX and CBL•SAT buttons are used to select the device you want to control. REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE The REVERSE, PLAY, FORWARD, RECORD, STOP and PAUSE buttons operate the same as on your original VCR remote. You must press the RECORD button twice to begin recording. Buttons also control similar functions for DVD and CD players. TV•VCR The TV•VCR button operates the TV•VCR fu

3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons ar

Please retain this guide for future reference. Table of Contents Install the Batteries 1 Button Description 2-4 Programming for TV 5 Programming for VCR 6 Programming For DVD 7 Programming For DBS System 8 Programming For Cable 9 Programming For Audio 10 Programming For Second Device 11 Operating Audio Function 12-13 Sleep Functions 14 Programming With Code Search 15 Identifying Codes For Your Remote 17 Warranty 18 Lost Codes 18 This Universal Remote Control is already programmed for most GE, RC

RM24926 Universal Remote Instruction Manual Control Remoto Universal Manual de Instrucciones Table of Contents Introduction.....................................................................................3 Setup..................................................................................................3 Battery Installation...............................................................3 Battery Saver...........................................................................3 C

Check the code list and repeat process. 5. Aim the remote at your TV and press the ON•OFF button. Your TV should turn off. CODE.. SEARCH.. INDICATOR.. LIGHT .. TV (BLINK) (OFF) 2 3 5 6 8 9 0 ON•OFF 1 4 7 CHAN + TV CODE.. NOTE: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 6. With your TV on, press CHAN+ (CHANNEL UP). If the TV responds, no further programming is required. 7. Enter your code here f

the MENU button might not work). There may be a code that performs more functions. Continue the code search process until the best code is found. 8 The Code Identification Feature allows you to identify the 4 digit library code stored under your device key. For example, if you want to find out what 4 digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button. 2. Press and release the des

Some products require ENTER to be pressed after channel selection. OK Selects menu items for the device you are controlling. ZOOM, ANGLE, TITLE Controls DVD functions. Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds. 5 DVDFunctions This remote has several dedicated buttons used for DVD functions. The descriptions may vary from your original remote descriptions. SCAN+ an