A wireway channel running down the length of the housing on one side on the top makes it easy to connect fixtures for continuous runs. The lens options include either an MPO (MICRO-PYRAMIDAL OPTIC) LENS for a more focused distribution that directs light energy away from the high-angle glare zone, or an OPAL LENS for a softer, more diffused light distribution. Both lens options provide a continuous line of light in the ceiling while hiding the lamps from view. Lamp Options: 1 or 2, 4' or 5' T5 /

¦ Commercial kitchens and commercial food processing areas. ¦ Where pointed spikes such as golf or track shoes will be used. ¦ Where the floor will be subjected to unusually concentrated static or dynamic loads. NOTE: Concentrated static and dynamic loads such as hospital beds, roll-out bleachers, portable x-ray machines, etc. may visibly damage resilient as well as other types of floor coverings. For questions regarding product suitability and detailed instructions for floor preparation and ins

]® TECHZONE™ Ceiling System Recessed Fixtures L/THON/A LIGHTING' Armstrong® TechZone™ Compatible TZ5 48" and 60" Lay-in and Tegular Fixtures for 9/16" and 15/16" Grid The TZ5 applies the Volumetric Lighting principal to the Tech Zone. It creates shadow-less lighting with controlled high angle brightness. The result makes spaces more attractive and facial features more well-defined and lively. The diffuser is an extruded flat lens backed with an optical overlay designed to control brightne

6 Tegular, 6" width 15/16" T-Bars 1, 2 and 3-slot Lengths: 24" to 72" ML-TZ-DF 4 Tegular, 4" width 15/16" T-Bars 1 and 2-slot Lengths: 24" to 72" fàTitus TheL—dertoMrmnaemetit 990 Security Row Richardson, TX 75081 972.699.1030 CS-3813-1010 © 2010 AWI Licensing Company mstrong

The TZ series is designed to easily integrate into the Armstrong's TechZone ceiling grid system providing a customized and aesthetically pleasing look with standard components. Modulinear TZ series diffusers are available in 1, 2, 3 and 4-slot configurations in several lengths. The unique, aerodynamically curved “ice tong” deflector blades allow both changes in air volume and direction from the face of the diffuser. This versatile diffuser is an excellent choice for variable air volume applica

1, 2, 3 and 4-slot Lengths: 24" to 72" ML-TZ-LT 4 Lay-In, 4" width 9/16" and 15/16" T-Bars 1 and 2-slot Lengths: 24" to 72" ML-TZ-NT 6 Narrow Tee, 6" width 9/16" T-Bar 1, 2, 3 and 4-slot Lengths: 24" to 72" ML-TZ-NT 4 Narrow Tee, 4" width 9/16" T-Bar 1 and 2-slot Lengths: 24" to 72" ML-TZ-DF 6 Tegular, 6" width 15/16" T-Bars 1, 2 and 3-slot Lengths: 24" to 72" ML-TZ-DF 4 Tegular, 4" width 15/16" T-Bars 1 and 2-slot Lengths: 24" to 72" fàTitus TheL—dertoMrmnaemetit 990 Security Row Richar

An incomparable design for interiors of distinction. Soft white, matte acrylic diffuser is regressed 2" above the ceiling plane by heavy gauge extruded aluminum trim with mitered corners. The satin white finish and trim style interfaces precisely with most ceiling suspension systems including TechZone. 7A fixture is also available in Black for WoodWorks® TechZone and Whitelume, Silverlume, and Gun Metal for MetalWorks™ TechZone. 6" Continuous 7A Yoke Bracket (by Armstrong) Tie Wires (by others)

This inspired design quietly articulates graceful, elegant lines and soft, perforated contours. The precision die cast components and dual cable supports convey a perception of unmatched lightness, low mass, and minimal scale. “The Shell” features an extremely wide and uniform indirect light distribution in a luminaire profile of only 10-1/2" wide x 2-1/4" high, with an integral ballast. Set-back ends and advanced joiner details give the visual impression of a light, radiant luminaire. All these

2. When W is energized, a 24-volt signal is also sent to the W terminal on the blower control board. Approximately 60 seconds after W terminal energizes, the timer on the blower control board closes the heat speed relay on the board. This sends line voltage to the H terminal on the blower control board, which starts the circulating air blower. 3. The induced draft blower and the circulating air blower continue to operate as long as W is energized. 4. When W de-energizes, a relay in the ignition

2. The contactor closes immediately upon receiving the 24-volt signal, causing the compressor and condenser fan motors to start. 3. The 24-volt signal is also sent to pin 1 of the 5-pin thermostat harness, initiating a 5-second circulating air blower “on” delay. 4. After the 5-second delay, the ignition control energizes the cooling speed relay and the circulating air blower starts. 5. When the cooling call is satisfied, the thermostat interrupts the R, Y and G circuit. The contactor de-energize