Installed in a remote room location, the WS100R receives the IR commands transmitted from your existing hand-held remotes in that room. The commands are carried via a category 5 cable to your A/V equipment in another room, and instantly “repeated”. The WS100R is compatible with all current Niles infrared systems. It may be used along with, or as an alternative to, the Niles TS100, MS100, MS200, MVC100IR and CS100 sensors or the IntelliPad®. The WS100R is just one part of the three building block

Remove the loudspeaker from the bag. The metal grille is installed on the loudspeaker and will need to be removed. This is easily done by rotating the mounting ‘dogs’ out with your fingers and pulling them towards the front of the loudspeaker. This will push the screw heads against the inside of the grille to work it out of the baffle. (See Figure 3) 2. At each loudspeaker location, route the wire to the input connectors, then separate the loudspeaker wire so that at least 2 inches of each condu

The IR commands are carried via a category 5 cable to your A/V equipment in another room, and instantly “repeated”. The TS100 represents one of the 3 building blocks necessary to complete a Niles IR repeating system: • IR Main System Unit—Models MSU140, MSU250, MSU480 and MSU440Z. • IR Sensors/Keypads—Models WS100, TS100, MS100, MVC100IR, MS200, CS100 and the IntelliPad®. • IR Flashers—Models MF1, MF1VF, MF2, MF2VF and the IRB1. An IR sensor expansion unit, Model IRH610, is available for IR repe

Use FG00320 or FG00898 (sold separately) PR6R includes everything required for installation NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 - NAPR6PDF ©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.

Niles manufactures the industry’s most complete line of custom installation components and accessories for audio/video systems. To see the complete Niles product assortment, visit us on the Internet at: PACKAGE CONTENTS Each package contains a CM850Si loudspeaker; 1 Aluminum MicroPerf™ Grille and 1 cardboard paint mask/hole cutout template. INSTALLATION CONSIDERATIONS We recommend using the following tools and material to install your Niles CM loudspeaker: Before starting the installation, pleas

There should be no gaps between the wall and the frame. IMPORTANT: DO NOT OVER TIGHTEN THE SCREWS! OVER TIGHTENING THEM MAY MAKE THE GRILLE DIFFICULT TO INSTALL 7. Direct the tweeter. (CM730, CM750 & CM760 only) The tweeter is directed by gently pressing on the outer edge of the tweeter housing. It will move up to 20 degrees in any direction. For critical listening, direct the tweeter towards the user’s favorite listening position. For surround sound or low volume background listening, create mo

If the wire’s movement is obstructed by anything, fill the hole(s) with spackle and try another location. 4. If the coat hanger moves freely in a complete circle and you have sufficient depth, hold the template up to the ceiling surface. The cardboard square with the circular hole is the template. The inner perforated circle within the larger circle that was removed in step 1 earlier is the paint mask. Keep it for painting the loudspeaker later. Outline the circular cutout on the ceiling surface

Use FG00321 or FG00899 (sold separately) HD8.3R includes everything required for installation NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 - NAHD8.3PDF ©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.

With proper installation and operation, you'll enjoy years of trouble-free use. Niles manufactures the industry's most complete line of custom installation components and accessories for audio/video systems. For a free full line catalog write: Niles, Catalog Request, P.O. Box 160818, Miami, Florida 33116-0818 TABLE OF CONTENTS INTRODUCTION FEATURES AND BENEFITS INSTALLATION CONSIDERATIONS FRONT AND REAR PANEL DETAILS 9 INSTALLATION 11 OPERATION 15 TROUBLESHOOTING GUIDE 16 SPECIFICATIONS 18 CAUTI

All rights reserved. Niles, the Niles logos and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. All other trademarks are the property of their respective owners. DS00577A C5-SVWM CONGRATULATIONS! Thank you for choosing the C5-SVWM S-Video Balun from Niles. With proper installation and operation, you’ll enjoy years of trouble free use. Niles manufacturers the industry’s most complete line of custom installation components and accessories for audio/vid