User Manual/Quick Start Guide and IP Power CD . Optional power cables 2) Install hardware . Connect power cables. For the USA model (NEMA5-15P 100-120V outlets) the individual max output current per outlet is 6A and the total max output current for the outlets is 15A. Use a power IN cable with 15A current rating and use power OUT cabless with 10A rating for each power outlet. IP Power 9258 For the European/Australian model (IEC320-C13 220-250V outlets) the individual max output current per outle

Default settings: DHCP client of TW-640 will take 1 IP address from ADSL operator with TW-EA701 modem. DHCP server will share automatically 1 IP for workstations. NAT protocoll is used as on default. DHCP client has to be default in workstations. Billion BIPAC-640 DSL/Cable IP-Sharing Router TELEWELL TW-640 Features SOHO firewall to automatically detect and block the DoS (Denial of Service) attack. Security logging for hacker’s attack with timestamp. All PCs in a LAN can share the connection usi

/¿fife w MercuryHub User Guide Mercury Hub User Guide PR0018 (Mains Powered) PR0017 (Mercury Controller Powered) Ensure that all power is switched off before installing or maintaining this product Revision 1.5 Page 1 of 6 MercuryHub User Guide Table of Contents: THE MERCURY HUB 3 Description............................................................................................. Front View...........................................................................................

7 1.2 TheWebNetStartkit .............................. 7 1.3 AboutthisManual ................................ 8 2 Unpacking 9 2.1 PackageContents................................. 9 2.2 TheWebNetDIMMModule........................... 9 2.3 TheWebRJSAdapterBoard .......................... 10 2.4 Connectingtheboards .............................. 11 3 Installation 12 3.1 ConnectingtotheNetwork ........................... 12 3.1.1 Connectingtoahub ........................... 12 3.1.2 Connectingtoanet

If you input your setting accordingly, the LCD will display the new setting. Otherwise, the LCD will display ‘Input Invalid’; press ESC to return to your previous setting. 5.2.5 Account Settings Press ‘SET/OK’ to the main menu, use ‘UP’ and ‘DOWN’ to select ‘Account Settings. A. Set phone number Press ‘SET/OK’ to the submenu, use ‘UP’ and ‘DOWN’ to select ‘Phone Number’. Press ‘SET/OK’, and then, use 0~9 to input the phone number B. Set user ID Press ‘SET/OK’ to the submenu, use ‘UP’ and ‘DOWN’

The Hub can be mains powered, or powered from 2 connected Mercury controllers. There are 10 RS232 connections for linking to Mercury controllers, 2 standard ethernet hub (10baseT) connections for other network devices and a dedicated ethernet Uplink port. Front View 10 x RS232 Ports for direct connection to RDM controllers Ports 1 & 2 are used to power the Hub in the non-mains version A Ensure that all power is switched off before installing or maintaining this product Revision 1.5 Page 3 o

The green (or green and yellow) conductor in the cord is the grounding wire. Never connect this wire to anything other than the grounding blade. The Floor Machine is provided with an attachment cap plug, as shown in Sketch A, and is intended for use on a nominal 120 volt circuit. If a properly grounded receptacle, as shown in Sketch A, is unavailable, an adaptor, as shown in Sketch C, is available and should be installed, as shown in Sketch B, if the outlet box that houses the receptacle is grou

Setting yourself up for conference calling now • Go to “My Account” interface • Enter your IP Phone Number, Password and the digits displayed then click Submit. • Click “My Conference Call” in the grey menu bar to view the Conference Call Setup: • Enter the maximum number of people you will likely be conferencing with at one time. • In some circumstances a password will be required for the Host and Participant to be involved in the conference. • Click on the check boxes to select the defaults of