Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see Wall mount installation in the user’s manual). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the

Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Telephone operation Making a call Using a cordless handset: Press PHONE/FLASH or /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds). Using the telephone base: Press /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, min

/DELETE Press to delete the message currently playing. Press twice to delete all old messages when the telephone is not in use. Answering system settings - announcement The announcement is the greeting callers hear when calls are answered by the answering system. The telephone has a default announcement, “Hello. Please leave a message after the tone.” You can use this announcement, or record your own announcement. You can record an announcement up to 90 seconds. The system does not record any an

When on a call, press to adjust the listening volume. PTT Press to initiate a one-to-one or one-to-group broadcast. Press and hold to broadcast to a group of system devices. MIC Microphone Quick reference guide - telephone base X/DELETE While reviewing the caller ID history, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or the recorded announcement. Pr

For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The screen shows Low battery until you have charged the battery without interruption for at least 30 minutes. The following table summarizes the battery charge indicators

The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Wall mount installation in the user’s manual for details. Electrical outlet not controlled by a wall switch Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service. Plug the small end of th

The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with protective stickers covering the handset and telephone base displays - remove them before use. For customer service or product information, visit our website at or call 1 (866) 288-4268. Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless tele

MENU/SELECT Press to display the menu. Once in the menu, press to select an item or save an entry or setting. OFF/CLEAR During a call, press to hang up. While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Press and hold while the handset is not in use to erase the missed calls indicator. CID/VOLUME Press to scroll down while in menus. Press to decrease the listening volume. Press to show the caller ID history when the handset is not in use. Wh

When the telephone base is ringing, press to mute the ringer temporarily. qCID Press to display the caller ID history when the phone is not in use. Press to scroll down while in menus and lists. While entering names and numbers, press to move the cursor to the left. MENU/SELECT When the telephone base is not in use, press to show the menu. While in the menu, press to confirm or save an entry or setting. pDIR Press to display the directory when the phone is not in use. Press to scroll up while in

Using the telephone base: 1. When the telephone base is in idle mode, press •/RECORD. 2. Press qCID or pDIR to scroll to >Announcement and press MENU/SELECT. The system announces, “Record after the tone. Press 5 when you are done.” 3. Speak towards the telephone base to record your announcement. Press 5 to end recording. Your recorded announcement plays. Play messages >Answering sys p q Record memo >Answer ON/OFF p q ANSWER ON/OFF >On p q Play annc >Record annc p q Record memo >Announcement p q