3 If the treadmill still will not operate, please call Keys Technical Service at (888) 340-0482. Treadmill walking belt slows during use. 1 Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less and the surge protector is securely plugged into the outlet. 2 If treadmill still will not operate, please call Keys Technical Service at (888) 340-0482. Treadmill walking belt slips or is not centered on rear ro

Tighten Firmly. NOTE : The Mushroom Self Bolt (85) is locked onto Pedal Foot (5). Please take out the Mushroom Self bolt (85) from Pedal Foot (5) before you connect the Plastic Cover for Transportation Roller (L) (36) with the Plastic Cover for Transportation Roller (R)(37), using the Mushroom Self Bolt (85) onto the Pedal Foot (5). Connect the Crank (72) with Allen Key Bolt (66) and Allen Key Bolt (67) onto the pedal foot. ASSEMBLY INSTRUCTION STEP 3 Insert the 490 Acrylic Plastic Sheet (L

Connect the front handlebar (23) to the console tube with the locknuts (49), flat washers (50) and screws (84) provided. Make sure not to “pinch” any of the pulse wires when connecting the handlebar to the console tube. 11 7878 7. Load your console with the batteries provided. Batteries are 4 8. You have completed the assembly of your new CardioMax bike. “AA” size. 12 13 835 RECUMBENT PARTS LIST NO. PART 1 FRAME 2 CONSOLE TUBE 3 SEAT CARRIAGE 4 FOOT TUBE CONSOLE 6 PULLEY 7 MAG BRAKE 8 SENSOR 9 S

Treadmill walking belt slips or is not centered on rear roller. 1 Refer to “Belt Adjustment and Tension” section on page 15. 2 Need help? Call Keys Technical Service at (888) 340-0482. Treadmill Error Messages. Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill until the problem is corrected. Call Keys Technical Service at (888

Using the same + or - buttons, select the speed for your workout, then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the INCLINE + or - buttons to set your workout incline, then press ENTER PROGRAM. To start, press the START/STOP button. USING THE FAN There are 3 different fan speeds to choose from MEDIUM, HIGH, and, STOP. To set the desired fan speed press the FAN button. PAUSE POWER INCLINE SPEED FAN ENTER 10 Program Operation PROGRAM MODE Plug treadmill into a surge protec

Last, slide the Top Plate (34) onto the guide rods. Note: Be sure the weight pin holes face towards the inside of the unit. Screw the Pulley Bracket (30) into the Top Plate (34). Secure the Guide Rods (19) to the top of the Left and Right Frames (1 & 2) using Allen Bolts M10X50 (57), Spring Washers M10 (61), and Washers M10 (60). STEP 3 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Slide Left Frame Slip (5) onto Left Slip Tube (13). Install Left Slip T

BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING TERMS AND CONDITIONS. Frame: Lifetime Parts: 3 Years Labor: 1 Year Limited Warranty This Limited Warranty applies in the United States and Canada to Products manufactured or distributed by Keys Fitness Products ,L.P. under the Keys Fitness Products (“Keys Fitness Products”) brand name (as used herein, the “Product” or “Products”). The warranty period to the original purchaser is listed above, and commences on the date of ori

Keys Technical Service, (888) 340-0482 KEYS Fitness Products, LP P.O. Box 551239 Dallas, TX 75239-1239 Part# 15-0144 Table of Contents 2 Information Table of Contents Specification Sheet Important Safety Information Before You Start Warm Up Exercises Assembly, Moving Instructions Power Requirements Console Functions and Descriptions Program and Operating Instructions Program Descriptions and Profiles Belt Adjustments and Tension Change to MPH or Km/H Maintenance Instructions Troubleshooting Guid

2) To reduce the risk of electrical shock, burns, fire or other possible injuries to the user, it is important to review this manual and the following precautions before operation. 2 It is the owner's responsibility exercise equipment have read with warnings and safety precautions. • This exercise unit has a user maximum • The CardioMax Elliptical Trainer should only be used on a level surface and is intended for indoor use only. It should not be placed in a garage, patio or near water. Keys rec

Step on belt slowly after the belt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or – (decrease) buttons. Heart rate will read out in the Incline window. • To select the Heart Rate Control program, press the “Heart Rate Control” button. • The incline window will flash “125”, which is the default program target heart rate. • Adjust Target Heart Rate to desired level with the TARGET + or – buttons. • Press START/STOP button, or continue instructions below to