2) Place item slowly on the panel. The scale will beep twice when the weight has been captured 3) Remove the item and its weight will display for 5 seconds How to use the “ Tare” feature: This feature allows you to obtain the exact weigh of an item in a container, by subtracting the weight of the container. 1) Place the container, without the item, slowly on the panel 2) Press the “ Tare” button and the weight of the container will be removed. 3) Slowly add the item to the container. The display

TOTAL TARE ZERO Short Q'ty kg g/pc pcs 2. Place the product on the platform. (In cased : 200 g) W eighing range : 40 g ~ 6/15 kg, e = d : 2 g / 5 g (0.1 lb ~ 15/30 lb, e = d : 0.005 lb/0.01 lb) lb Model : CB-15N WEIGHT UNIT WEIGHT QUANTITY BAT Short Unit Wt. TOTAL TARE ZERO Short Q'ty kg g/pc pcs ¦ Procedures to add up the Unit weight - Although there are many products to be measured, the quantity of the scaled each objects can be added up disregarding their unit weight. - The number of add-ups

¦ Procedures to Set up and Release the Tare: Used when scaling liquid or grain type substances that require a container. • Cases when the container weight is not known. 1. Place the container on the platform. 2. Push the “Tare” key when the weighing is stable. 3. Check the lighting of Tare. • Cases when the container weight is known. 1. Input the container weight using the number keys. 2. Push the “Tare” key. 3. Place the container on the platform. 4. Check the lighting of Tare. • Release the Ta

Pocket Scales WWW.Elca/l.COm How to weigh 1) Make sure your scale is at normal room temperature. 2) Press the “ON/TARE” key. All display segments will appear for approximately 3 seconds before resetting to zero. 3) Press the “UNIT” key to select unit mode. 4) Place item slowly on the platform. Please Note: This scale is a precision instrument. The read-out may go up or down slightly. This can be caused by air currents or vibrations. Stable weighing is achieved when the display remains fix

This button is located on the front of the scale, right from the display. With this button, you control all normal operating features; On, Off, and Tare. How to weigh: 1) Turn the scale on. All display segments will appear for approximately 2 seconds before resetting to zero. 2) Place item gently on the platform. How to use the “Tare” feature: This feature allows the display to be reset to zero after you weigh an item in a container or bowl. It shows the weight of additional items as if you

: 0.31W Platform Size(mm) 337(W) . 256( L) Product Size(mm) Non-pole type 348(W) . 382.4( L) . 153(H) Product Weight Non- pole type 4 kg Display Two side display: Weight (5 Digits), Quantity (8 Digits) , Unit Weight (6 Digits) Operating hours with battery Manganese battery - 500hrs , Alkaline battery - 1,000hrs (Without Back light) Direct PLU 20 Direct PLU keys Quantity Shortage Range g 15 30 75 150 lb 0.03 0.66 0.2 0.3 Unit Weight Shortage Range g 0.33 0.66 1.33 3.33 lb 0.001 0.002 0.003 0.00

• Use a soft cloth with appliance of alcohol when polishing the scale. • Keep out water or any liquid-type substance from the scale. • Check to see if the scale is placed horizontally before use. If the scale is not in a horizontal position, use the horizontal positioning screw in order to adjust its position. (Have the foam inside of the level gauge be in the center. ) • When the scale is turned on, the display will be set to initial scaling condition after indicating RB-XX. In order to maintai

Avoid rough treatment, shaking and vibration. 4) Do not disassemble this scale or the warranty will be void. 5) The display value may be affected by electromagnetic disturbances such as operating near a radio. If this occurs, move the device that is causing the disturbance and turn the scale off and restart. Capacity: Model 63D & 63DS – 6.6 Lb / 3 Kg Model 136D & 136DS – 13.2 Lb / 6 Kg Increments: 1 gram, 0.1 ounce (1/10th oz.) Weight Modes: grams, ounces, Kg/gm, and lb./ oz. Auto Shut Off: Turn

1) Place the item slowly on the panel. 2) Press the “ Hold” button. The word “ Hold” will be displayed. 3) The weight will be fixed on the display for 5 seconds. How to use the “ Tare” feature: This feature allows you to obtain the exact weigh of an item in a container, by subtracting the weight of the container. 1) Place the container, without the item, slowly on the panel 2) Press the “ Tare” button. The word “ Tare” will appear on the display and the weight of the container will be removed. 3