If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. • DESCRIPTION: The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump i

See our catalog or website for more details. • On some 351-W Ford engines there may be casting flash on the front cover which will interfere with proper seating of your new fuel pump. File this area flat for proper gasket seating. • When installing fittings, we recommend a liquid teflon thread sealant be used. This will help prevent the fitting from galling and ensure a proper seal. DO NOT use teflon tape. DO NOT over tighten the fitting as this can crack the housing and void the warranty. WARNI

Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper i

Polished Aluminum Water Pump #8892 fits the same applications as #8882. • ACCESSORIES Use #8830 Spacer Kit for short style pumps to clear competition camshaft gear drives and belt drives. Kit includes 1/2" thick water pump and crank pulley spacers. • INSTALLATION Installation is the same as for original equipment water pumps, except that aftermarket reverse rotation serpentine belt pulleys MUST be used. Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan b

NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 & #8860 - 5-3/4" #8851, #88512 & #8861 - 7-5/16" #8852 & #8862 - 5-3/4" #8853 & #8863 - 7-5/16" #8854, #8864 & #88544 - 5-3/4" #8858 & #88584 - 5-1/2” WARNING Incorrect ali

If you have any questions or problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628. • DESCRIPTION The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump is externally the same as original equipment pumps to provide compatibility with all accessories and pulleys. It offers weight savings along with increased durability and cooling potential. An additional feature is the threaded tab for a cam stop that can be used t

If you have any questions or problems, do not hesitate to contact our Technical Hotline at: (800) 416-8628. • DESCRIPTION : The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump is externally the same as the original equipment service pump (Ford #D4TZ-8501-H) to provide compatibility with all accessories and pulleys. It offers weight savings along with increased cooling potential. As with all Ford FE engines the water pump is designed to

Consult your service manual for any other specific procedures. Caution: Be sure that the fan bolts don't protrude through the hub so far they hit the water pump housing. • SPECIAL NOTES : — Check closely for any interference with drive belts or pulleys. — If the engine is not using a water thermostat, a water flow restrictor plate should be used in place of the thermostat. The hole size needed in the restrictor plate may vary in size from 11/16" to 1" diameter depending on your water system.

NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 & #8860 - 5-3/4" #8851, #88512 & #8861 - 7-5/16" #8852 & #8862 - 5-3/4" #8853 & #8863 - 7-5/16" #8854, #8864 & #88544 - 5-3/4" #8858 & #88584 - 5-1/2” WARNING Incorrect ali

Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Monday through Friday, Pacific Standard Time. IMPORTANT NOTE: Proper installation is the responsibility of the