Menu 6 Screen 10. This screen shows the setting of the setback load rate option. It can be set to Off or On. “Off” turns the setback load rate function off, and the dryer will not change the process set point. The "On" setting tells the dryer to go into setback when the load rate gets to its set number of loads per hour Menu 8, Screen 12. (continued next page) 4Operation Operation l 4-11 Control Function Descriptions (continued) Screen Function Screens 15-27 require access code 754. Screen 28-43

This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified

To get the greatest benefit from your purchase, please read this entire brochure before using your scale. ©2006 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China. ©2006 Weight Watchers International Inc. All rights reserved. Weight Watchers is the registered trademark of Weight Watchers International Inc. and used under license. Service Centers Conair Corporation Service Department 150 Milford Road East Windsor, NJ 08520 Conair Corporation Service Department 7475 N. G

Persistent pain could be a symptom of a more serious condition. 5) Never use any foot bath on open wounds, discolored areas, or any area of the body that is swollen, burned, inflamed or where skin eruptions or ulcerated sores are present. 6) This product should never be used by any individual suffering from any ailments that would limit or altogether inhibit the user’s capacity to feel or have any sensation in the body part that the product is being used for. 7) Do not use if you are diabetic, h

It’s a good idea to record the model and serial number(s) of your equipment and the date you received it in the User Guide. Our service department uses this information, along with the manual number, to provide help for the specific equipment you installed. Please keep this User Guide and all manuals, engineering prints and parts lists together for documentation of your equipment. Date: Manual Number: UGD024/0304 Serial Number(s): Model Number(s): DISCLAIMER: The Conair Group, Inc., shall not be

It’s a good idea to record the model and serial number(s) of your equipment and the date you received it in the User Guide. Our service department uses this information, along with the manual number, to provide help for the specific equipment you installed. Please keep this User Guide and all manuals, engineering prints and parts lists together for documentation of your equipment. Date: Manual Number: UGB007/1103 Serial number(s): Model number(s): Mrev: 1/17/2003 DISCLAIMER: The Conair Group, In

Return the appliance to a Conair Service Center for examination and repair. 5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during storage. 6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like. 7. Never use while sleeping. 8. Never drop or insert any object into any opening or hose. 9. Do not use outd

To reduce the risk of death or injury by electric shock: 1. Always “unplug it” immediately after using. 2. Do not use while bathing. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in, or drop into, water or other liquid. 5. If an appliance falls into water, “unplug it” immediately. Do not reach into the water. WARNING – To reduce the risk of burns, electrocution, fire, or to persons: 1. This appliance should never when plugged twist, or wrap

2) Do not reach for an appliance that has fallen into water. Unplug immediately. 3) Do not use while bathing or in a shower. 4) Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. WARNING– To reduce the risk of burns, fire, electric shock, or injury to persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2) Do not o

With the power removed, check the overload settings and confirm that the settings match the full load amps listed on the process blower motor. Wait 3 to 15 minutes with the power on until the dryer indicates the overload condition has cleared then try to restart the dryer. 6Troubleshooting Troubleshooting l 6-9 Passive Alarms If the amber Acknowledge Alarm LED is blinking, the alarm is a passive alarm. The dryer continues to operate, but this problem could prevent correct drying of your material