Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Lifebreath Air Purifier 155MAX

downloaded: 45File size: 1 mb    Manafacture: Lifebreath  
Category: Air Cleaners

Excessive negative pressure may also cause the backdrafting of vented combustion equipment. Read the Application Warning on the front of this manual! Prior to balancing, ensure that: 1. All sealing of the ductwork system has been completed. 2. All of the HRV/ERV's components are in place and functioning properly. 3. Balancing dampers are fully open. 4. Unit is on HIGH speed. 5. Air flows in branch lines to specific areas of the house should be adjusted first prior to balancing the unit. A smoke

Lifebreath 95MAX

downloaded: 43File size: 978 kb    Manafacture: Lifebreath  
Category: Air Cleaners

99-105 Programmable Ventilation Control (PVC) includes Programmable Time Clock, Dehumidistat and Air Sentry™ 99-109 Air Sentry™ Air Quality Monitor designed to accept remotely mounted Control Pad 99-250 Ventilation Dehumidistat -Dehumidistat designed to accept remotely mounted Control Pad. 99-160 Duct Heater w/ Electronic SCR Thermostat, 1 Kw, 7” (178 mm) 99-161 Duct Heater w/ Electronic SCR Thermostat, 2 Kw, 7” (178 mm) 99-186 Weatherhoods, Two - 6” (150 mm) c/w 1/4” (6mm) mesh screen WARRANTY

Lifebreath RNC10

downloaded: 37File size: 2 mb    Manafacture: Lifebreath  
Category: Fans

During the air conditioning season, the HRV will help cool the incoming fresh air with the cooler stale exhausting air. RNC Electronics RNC electronics offers standard 2-speed operation of low/high. There is also an installer selectable 2-speed operation of medium low/high (refer to "Increasing Low Speed to Medium Low" in this manual). The RNC circuit board also includes an interlock relay which is used to Interlock the HRV to an Air Handler/Furnace. Refer to "Interlocking HRV Operation to an Ai

Lifebreath 100 DEF

downloaded: 22File size: 2 mb    Manafacture: Lifebreath  
Category: Fans

During the winter months, the incoming cold fresh air is warmed by utilizing the heat recovered from the stale air before it is exhausted to the outdoors. During the summer months, the cool outgoing stale air from the air conditioned dwelling is used to help cool the incoming fresh air. Your HRV features the digital electronic BASE MODULE that uses a microprocessor to control fan speed and unit operation. Both digital (3 wire) and standard (2 wire) remote devices can control the HRV when conne

Lifebreath 120ERV

downloaded: 20File size: 2 mb    Manafacture: Lifebreath  
Category: Fans

foil duct tape • knife • zip ties • caulking gun • 1/2” I.D. drain hose • smoke pencil Balancing Tools • Pitot Tube Balancing Kit [Case, 8 ft. vinyl tubing, Pitot tube, magnehelic gauge (0 -0.25”), and mounting plate] or • Pitot Tube with instructions and Digital Manometer (with resolution of 0 -0.25” -must read to 1/100ths of an inch) Optional Accessories • 20 Minute Fan Timer • Wall Mounted Dehumidistat • Weather hood Kit • Round Diffuser 4” (100mm) 5” (125mm) 6” (150mm) 8” (200mm) • Kitchen G

Lifebreath 1200ERV

downloaded: 17File size: 968 kb    Manafacture: Lifebreath  
Category: Air Cleaners

W.C.) TOTAL CURRENT DRAW VAC5.5 HIGH 4.7 LOW 70% 60% 50% 143 (300) 190 (400) 235 (500) 282 (600) 329 (700) TEMPERATURE EFFECTIVENESS AIRFLOW IN L/s (CFM) EFFECTIVENESS 5.0 MED PERFORMANCE SPECIFICATIONS CORES Modular (2 section) patented aluminum heat recovery cores arranged for efficient cross-flow ventilation. MOTORS Two PSC, 3 speed single shafted, 120 VAC, 2.75 Amps each (5.5 total on high speed). HP - 1/10, 1625 RPM. Watts - total on high speed - 648. FILTERS Washable air filters in exhaust

Lifebreath Air Purifier 95MAX

downloaded: 15File size: 1 mb    Manafacture: Lifebreath  
Category: Air Cleaners

DIRECT CONNECTION of both the HRV/ERV SUPPLY AIR STREAM and EXHAUST AIR STREAM to the FURNACE COLD AIR RETURN RETURN AIR *Unit is normally balanced on HIGH speed with furnace blower ON. 40" (1m) MINIMUM O O Outdoors Cool Air Return NOTES: 1. Furnace blower may be required to operate when ventilation from HRV/ERV is required. The furnace should be set to run continuously or interlocked with HRV/ERV. 2. A minimum separation of 40 inches (1 m) is required between the two direct connections. 3. The

Lifebreath 1000RHCAC

downloaded: 15File size: 389 kb    Manafacture: Lifebreath  
Category: Air Cleaners

Due to numerous applications in which this equipment can be installed, it is difficult to predict servicing intervals. In certain situations where there is heavy smoke, servicing the equipment every one two months may be needed; whereas ventilating a meeting room for example for carbon dioxide may only need service every six months to a year. Motor Access to the motor is through the front service doors. Note heat exchanger core can be removed to provide more room. See CORE in this section. The m

Lifebreath 700FD/DD

downloaded: 11File size: 968 kb    Manafacture: Lifebreath  
Category: Air Cleaners

Condensation or Ice Build Up in Insulated Duct to • incomplete vapour barrier around insulated duct • tape and seal all joints the Outside • a hole or tear in outer duct covering • tape any holes or tears made in the outer duct covering • ensure that the vapour barrier is completely sealed Water in the bottom of the HRV/ERV • drain pans plugged • ensure O-Ring on drain nozzle sits properly • improper connection of HRV/ERVs drain lines • look for kinks in line • HRV/ERV is not level • check water

Lifebreath RNC120D

downloaded: 8File size: 2 mb    Manafacture: Lifebreath  
Category: Fans

The HRV cabinet has prepunched holes for the drain (see below). Insert the drain spout through the hole in the drain pan. Do not forget the “O ring” which seals each spout to the pan REMEMBER TO HAND TIGHTEN ONLY the washer and lock nut which hold the drain spout in place. Construct a P-Trap using the plastic tee connector. Cut two lengths of hose and connect each piece to an end of the “T” fitting, then connect the other ends to the two drain spouts. Position the “T” fitting to point upward and





Category