There are several occupational and non-occupational causes for pleural plaque. It should be noted that plaques are not “pre-cancer” nor are they associated with any measurable effect on lung function. Rosemount Analytical Inc. A Division of Emerson Process Management Instruction Manual IB-106-340C Rev. 4.1 July 2004 Hazardous Area Oxymitter 4000 TOXICOLOGY A number of studies on the health effects of inhalation exposure of rats and hamsters are available. Rats were exposed to RCF in a series of

Because these instruments are sophisticated technical products, you MUST properly install, use, and maintain them to ensure they continue to operate within their normal specifications. The following instructions MUST be adhered to and integrated into your safety program when installing, using, and maintaining Rosemount Analytical products. Failure to follow the proper instructions may cause any one of the following situations to occur: Loss of life; personal injury; property damage; damage to th

The standard application can be used with the appropriate Bristol® ControlWave® PLC/RTU, from Emerson Process Management to meet the I/O requirements at the various sites. The combined solution offers a cost effective system that is ready to deploy without the typical programming overhead. Benefits Pre-programmed package eliminates the need • for custom programming One package for one to three pumps provides • consistency for operators and technicians Local Display/Keypad Operator Interface pane

All rights reserved. ELITE and ProLink are registered trademarks, and MVD and MVD Direct Connect are trademarks of Micro Motion, Inc., Boulder, Colorado. Micro Motion is a registered trade name of Micro Motion, Inc., Boulder, Colorado. The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. All other trademarks are property of their respective owners. Contents Chapter 1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The DVS205 communicates via a serial format with the FloBoss. Variables Functionally, the DVS205 is a digital transmitter that measures two flow-related variables simultaneously: differential pressure and static pressure. These variables are continuously available to the FloBoss unit that polls the DVS205. Transducer and Electronics The DVS205 contains a transducer and an electronics circuit. The transducer uses capacitance- cell technology to sense differential pressure and piezoresistive techn

Now, you can install a single instrument without the hassles you face when you try to use separate equipment for automation and measurement operations at remote sites. The ControlWave XFC package features the following: • ControlWave family platform that is pre-programmed to meet API 21.1 requirements for a two-run metering and regulating station • High performance, smart multivariable transducer assembly is a separate component that can be removed and replaced independently of the electronic

The EC declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the internet at or through your local Micro Motion support center. Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the internet at documentation. For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply. Other information Full product specificatio

However, with the growing popularity of Bristol® ControlWave®, from Emerson Process Management, the latest generation hybrid PLC/RTU products, customers have expressed interest in an inexpensive migration path to allow them to realize all of the benefits of the new ControlWave technology without replacing their entire SCADA system. The new CPU products, named CW_10, CW_30, CW_35 and CW_31 (generically CW_XX), are intended to offer a cost-effective upgrade path to the ControlWave architecture for

Removed all references to JIS specifications. Replaced SPS 4000 information with SPS 4001B information. Cover Updated photo, revision number and date. viii Removed Figure 3. Oxymitter 4000 with SPS 4000 Wiring Diagram from Quick Start Guide. 1-2 Revised Figure 1-1 to show SPS 4001B and updated IMPS 4000. 1-5 Revised Figure 1-2 to show SPS 4001B. 1-8 Added step 11 and Figure 1-6. 1-10, 1-11 Revised Figure 1-8 and Figure 1-9 to show SPS 4001B. 1-12 Removed Components paragraph. 1-13 Removed Figure

These include a compact Nema 4X rated enclosure, power supply and solar panel options with battery backup, operator display/keypad input options, and wireless communication options. Standardization eliminates the need for in-house panel and packaging design and fabrication resulting in lower initial installation cost. This also standardizes the maintenance effort to reduce the long term cost of ownership. As an integrated RTU in a SCADA system, ControlWave ExpressPAC has the unique attributes re