In Canada, parts may be ordered from any of the Canadian Authorized Service Centershown on thenclosed list. Be sure to provide the MODEL and SERIAL numbers of your downriger when ordering parts. Please use the corect part numbers from the parts list. Payment for any parts ordered from the CANON parts department, may be by cash, personal check, Discover Card, MasterCard or VISA. Torder, cal 1-80-27-643 or FAX 1-80-527-464. > PART OF ASSEMBLY > ITEM CANOT BE SOLD SEPARATELY * PARTS USED BUT NOT SH

Examine the top of the terminator and note the Unwind about 2 feet of cable order shown in the detail to run cable. and thread the cable through the rubber cushion. Lead cable into HOLE A. Pull six inches of cable through. Thread cable through swivel, then up into bottom of the terminator. Lead cable out of HOLE B and into HOLE C. Push the cable until its end touches the inside of the terminator hook. HOLE A Swivel TIP: Use only straight cable, not kinked. Tighten cable by squeezing terminator u

EASI-TROLL hS EASI-TROLL /E LAKE-TROLL NOTE: Do not return your CANNON® Downrigger to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON® at 1-800-227-6433; • returning your downrigger to the Factory Service Center; • sending or taking your downrigger to any CANNON® Authorized Service Center on enclosed list. Please include proof of purchase, serial number and purchase date for warranty service with any of the above options.

in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft Windows® is a registered trademark of Microsoft USA in the United States and other countries. • Other brands and product names used in this manual may be trademarks or registered trademarks of their respective companies. . Do not connect the scanner to the computer before installing the software. If you connect the scanner and turn it ON before you install the software, the wizard screen on t

JOHNSON OUTDOORS INC. DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WARRANTIES (EXCEPT ON THE BOOM, MOTOR, REELS, AND ALL LEXAN®* PARTS), INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EXTEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE (AND IN THE CASE OF THE BOOT COVERS, CLOTHING, DACRON LINE, RUBBER BANDS, SWIVEL LOCK PIN, WEIGHTS, AND WIRE CABLE, JOHNSON OUTDOORS INC. DISCLAIMS ALL IMPLIED WARRANTIES). THIS

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day. Step 2 Place food onto the correct shelf position in the oven and close the oven door(s). TIMER OPERATION At the end of the Automatic Cook Period the Auto Symbol "A" will flash and an intermittent bleeping sound will be heard. The symbol will go out. The bleeping sound will continue for several minutes unless cancelled. (see step 8) The "A" symbol will continue to flash until the timer is re

Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON® at 1-800-227-6433; • returning your downrigger to the Factory Service Center; • sending or taking your downrigger to any CANNON® Authorized Service Center on enclosed list. Please include proof of purchase, serial number and purchase date for warranty service with any of the above options. CAUTION: READ THIS MANUAL CAREFULLY BEFORE OPERATING YOUR NEW CANNON® DOWNRIGGER. RETAIN FOR FUTURE

To minimize exposure to these substances, always operate this unit according to the use and care manual, ensuring you provide good ventilation when cooking with gas. READ AND SAVE THESE INSTRUCTIONS Important Safety Instructions General Safety Precautions To reduce the risk of fire, electric shock, serious injury or death when using your cooktop, follow basic safety precautions, including the following: If you receive a damaged product, immediately contact • your dealer or builder. Do not instal

Remove any food spillage or cleaning materials from the ignitor using a small nylon brush such as a tooth brush. Access to the ignitor can be achieved by lifting off the loose burner parts carefully when the burners are cool. When the hotplate burner bodies and caps are removed for cleaning, be careful not to drop any food particles or cleaning materials into the burner bases, to avoid the possibility of blocking the gas jets. If aluminium based pans are used, a silvery deposit may appear on the

1. The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth. 2. The front feet can be simply screwed in or out to lower or raise the front of the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully. VIEWED FROM THE REAR STABILITY BRACKET The back of the cooker has a slot for engagement of a stability bracket, which can be obtained, as an extra, from your cooker supplier. STABILITY BRACKET