Information contained herein is the property of AirLink Communications, Inc. and is produced for the purpose of detailing technology developed by AirLink Communications, Inc. and its employees. Reproduction or distribution of this document without the express written consent of AirLink Communications, Inc. is strictly prohibited. This document is subject to change without notice. O Copyright AirLink Communications, Inc, 2001. All rights reserved. Please send comments to: Email: pubs@AirLink.com
•Outgoing Network Connection: Enables an outgoing connection to the specified host. •Outgoing Telnet Connection: Enables an outgoing telnet connection to the specified host. •Modem Service Options: When Modem Service is selected, you may also configure the Source TCP Port. In most cases, the value used for the source port is arbitrary and you can leave this field set to 0 for “any”. However, if your server or firewall has specific requirements you may specify an explicit source port number in th
See Fig. 1.1 Step 2 Make sure the printer is powered OFF, then connect one end of the USB cableto the USB port of the Print Server and attach the other end of the cable to the USBport of the printer. Step 3 Turn ON the printer. Step 4 Plug one end of the power cord into the Print Server and the other end into anelectrical outlet. Fig. 1.1 Section 2 Section 2 Configuring Client IP Address Note: The default IP address of the Print Server is 192.168.1.254 with a subnet mask of 255.255.255.0 The Pri
Once the Raven’s IP has been updated in IP Manager, it can be contacted via name. If the IP address is needed, you can use the domain name to determine the IP address. Note: The fully qualified domain name of the Raven will be a subdomain of the domain used by the IP Manager server. As a free service, Airlink maintains an IP Manager server which can be used for any AirLink modem. The domain is earlink.com and is used in all the samples below. Configuring the Raven for Dynamic IP To configure the
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which cas
AirLink+ 26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over 100-Mbps Fast Ethernet and a hundredfold increase over 10-Mbps Ethernet. Since it is compatible with all 10-Mbps and 100-Mbps Ethernet environments, Gigabit Ethern
This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. Designed for the business and home, it saves you the cost of installing a separate modem and ISP line for each computer, while providing ready connection for the users, with or without network cables. Broadband network access is also gaining ground. However, allowing more than two computers to access the Internet at the same time means higher costs. Thus, there is a need to share one leg
© Copyright AirLink Communications, Inc, 1993-2004. All rights reserved. Please send comments to: email: pubs@AirLink.com Fax: 510-264-5422 Phone: 510-264-5400 Post: AirLink Communications, Inc. Attention: Technical Publications Dept. 3159 Corporate Place Hayward, CA 94545 Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays
Unpacking Open the shipping carton and carefully unpack the contents. The carton contains the following items: • One the 16-port 10/100Mbps Fast Ethernet Switch • One external power adapter • Four rubber feet to be used for shock cushioning • This User's Guide AirLink+ 16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide If any item is missing or damaged, contact your local reseller for replacement. Installation The site where you install the Switch may greatly affect its performance. Wh