35 19. 20. Install spacers (51) onto backboard brackets (52), with bolts (53, 54) and lock nuts (55, 37) as shown. 53 51 37 52 55 54 IMPORTANT!: KEEP HARDWARE LOOSE UNTIL AFTER STEP 25 IS COMPLETED. P/N 211574 09/04 18 58 59 57 56 56 59 68 58 59 57 56 56 59 68 56Lower Elevator tube Toward Pole 52 21. Toward Board Identify elevator tubes (63 & 56). Toward 63 Toward Board Pole Upper Elevator tube Attach lower elevator tubes (56) and counter balance spring (68) to backboard support brackets (52) us

Huffy steht zur Qualitat seiner Produkte! Wir freuen uns, da. Sie eines unserer ausgezeichneten Produkte gewahlt haben und sind zuversichtlich, da. Sie mit diesem Kauf sehr zufrieden sein werden. Obwohl unsere Produkte mit der gro.ten Sorgfalt hergestellt werden, konnen bisweilen Probleme auftreten. Bitte wenden Sie sich in diesen Fallen an unser Kundendienstzentrum, damit wir Ihr Problem schnell und richtig beheben oder Ihre Fragen beantworten konnen. Wir konnen Ihnen schneller helfen, wenn Sie

8. Attach backboard assembly to pole section (11). Install pole cap (43). 42 21 43 21 29 29 27 USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY. TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! 11 27 P/N 21154401 01/04 10 9. 9. 10. Attach adjustment rod (47) to lower elevator Insert handle assembly through pole tubes (29) using bolt (27) spacer (59) and nut mount assembly as shown. Lock pole (42) as shown. assembly in p

x 1.19 Long 56 4* 203257 Zip Tie 57 1 203255 Front Cover * You may have extra parts with this model. P/N 211447 04/01 4 printed on recycled paper ENGLISH INSTRUCTIONS use washers here on spring return style rim. NOTE B: Mounting nuts and IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF bolts supplied with rim hardware. THIS OWNERS MANUAL 20. 1. Remove all contents from underside of tank. Keep tank (1) bottom side 21. up. 22. 2. Insert axle rod (2) through wheel (3), as shown. Secure wheel a

4 5 6 WOOD SCRAP (NOT SUPPLIED) POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP. NOTE: 5. P/N 21495407 08/05 10 6. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). 7 4 8 6 5 7. Insert pole assembly into tank assembly as shown. 6 WARNING! 7 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR 8 PROPERTY DAMAGE. IMPORTANT!: DO NOT OVER TIGHTEN 8. Carefully place unit on its side. Secure pole bottom (6) to ta

BASKETBALL CENTER BASKETBALL CENTER IMPORTANT! To ensure prompt and correct handling of any problems, or to answer any questions, please contact the Sample and Display Technician at 1-800-558-5234. REQUIRED TOOLS AND MATERIALS: • Wrenches: (Two each) 7/16”, 1/2”, 9/16”, and 3/4” or Pliers • 3/16” Allen Wrench • Step Ladder, 8 ft. (2.4 m) Model 89780 SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. This unit is i

PLEASE WRITE YOUR MODEL NUMBER IN THE SPACE PROVIDED ABOVE. Toll-Free Customer Service Number for U.S: 1-800-558-5234 Internet Address: © COPYRIGHT 2002 by HUFFY SPORTS 1 12/02 P/N 211670 McCall's REBOUNDER PARTS LIST (See Hardware Identifier) REBOUND ARM Item Qty. Part No. Description 1 1 200416 Base (Black) 2 4 200417 Casters 3 1 200419 Left Support Brace 4 1 201875 Right Support Brace 5 1 200423 Outer Pole Assembly 6 1 201876 Inner Pole, Fixed Upright 7 1 201877 T-Screw OUTER POLE GRADUATED S

TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People SHARP OBJECT INFLATION NEEDLE KEEP OUT OF REACH OF SMALL CHILDREN. NOT FOR CHILDREN UNDER 3 YEARS. CHOKING HAZARD SMALL PARTS: INFLATION NEEDLE AND SMALL HARDWARE. NOT FOR CHILDREN UNDER 3 YEARS. KEEP BAGS AWAY FROM BABIES AND CHILDREN. DO NOT USE IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THE THIN FILM MAY CLING TO NOSE AND MOUTH AND PREVE

SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. This unit is intended for display purposes only and should not be used for play. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts in this document. Proper and complete assembly, use an

• When moving system, use caution to keep mechanism from shifting. • Keep pole top covered with cap at all times. • Do not allow water in tank to freeze. During sub-freezing weather add non-toxic antifreeze, sand or empty tank completely and store. (Do not use salt.) • Use extreme caution if placing system on sloped surface. System may tip over more easily. 201241 2/99 In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 The NBA and individual NBA member team identifications reproduced on this