Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

McCulloch Electramac 95390028700

downloaded: 1File size: 4 mb    Manafacture: McCulloch  
Category: Chainsaws

The difference between these determines the cutting depth; a file guide and a 4mm diameter round file are needed to obtain good sharpening results; Follow the instructions below: Once the chain has been mounted and the tension is correctly adjusted, and the chain brake is activated, position the file guide perpendicular to the bar as shown in the illustration(fig.12), filing the cutting teeth at the angle shown(fig.13), always working from the interior towards the exterior, lessening the pressur

McCulloch X7502825300

downloaded: 0File size: 2 mb    Manafacture: McCulloch  
Category: Garden Tools

NOTE: Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized Shindaiwa dealer. Adjusting Engine Idle The engine must return to idle speed whenever the throttle lever is released. Idle speed is adjustable, and must be set low enough to permit the engine clutch to disengage the cutting attachment. WARNING! The cutting attachment must NEVER rotate at engine idle! If the idl

McCulloch 81644

downloaded: 5File size: 4 mb    Manafacture: McCulloch  
Category: Garden Tools

As the engine owner, you should however be aware that Shindaiwa Corporation may deny your warranty coverage if your engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications. You are responsible for presenting your engine to the nearest dealer authorized by Shindaiwa Corporation when a problem exists. If your Shindaiwa Dealer is unable to answer questions regarding your warranty rights and responsibilities, you should then contact your Shindaiwa Distribu

McCulloch 41AY06PR966

downloaded: 0File size: 486 kb    Manafacture: McCulloch  
Category: Chainsaws

McCulloch Cabrio 341/34cc

downloaded: 1File size: 492 kb    Manafacture: McCulloch  
Category: Garden Tools

7 VIBRATIONS LEVEL BLADE (ISO 7916) (m/s2) MAX-MIN 9,05-1,8 9,05-1,7 i DATI TECNICI CILINDRATA (cm3) 34 38 ALESAGGIO x CORSA (mm) 38x30 40x30 POTENZA (Kw) 1,2 1,3 REGIME DI MASSIMA POTENZA (min-1) VELOCITA MAX A VUOTO (min-1) VELOCITA DI MINIMO (min-1) VELOCITA ALBERO PORTALAMA (min-1) 8.000 10.000 2.800 7.700 8.000 10.000 2.800 7.700 COPPIA SERRAGGIO DADO BLOCCALAMA (Nm) 17 17 PESO A SECCO (Kg) CAPACITA SERBATOIO MISCELA (cm3) 7,1 900 7,3 900 PRESSIONE SONORA (ALL’ORECCHIO DELL’OPERATORE) LpAav

McCulloch 2203

downloaded: 2File size: 304 kb    Manafacture: McCulloch  
Category: Blower systems

Read the User Manual. Lire le manuel d’utilisation. Lea Manual de Usuario. OPERATING INSTRUCTIONS 1. Always wear safety goggles or other suitable eye protection. 2. Always wear long pants, shoes and gloves. Do not wear loose clothing, jewelry, short pants, sandals, or go barefoot. 3. Always wear a respirator or face mask when working with the blower in a dusty environment. 4. Always inspect the area before starting the appliance to remove debris and hard or sharp objects that can be blown or cau

McCulloch MB2205

downloaded: 1File size: 733 kb    Manafacture: McCulloch  
Category: Blower systems

McCulloch 41AY69CR977

downloaded: 1File size: 391 kb    Manafacture: McCulloch  
Category: Chainsaws

McCulloch 115376927

downloaded: 1File size: 266 kb    Manafacture: McCulloch  
Category: Blower systems

Veuilleznepasretournerleproduitaudetaillant. 1--800--554--6723ENGLISHPleasedonotreturnproducttoretailer. Porfavor,nodevuelvaelproductoallugardecompra. Veuilleznepasretournerleproduitaudetaillant. 1--800--554--6723 Register your product online at: Registre su producto en linea en: Enregistrez votre produit en ligne a l’adresse : Instruction Manual Manual de Instrucciones DonotthrowawayManueld’InstructionsESPANOL IMPORTANT MANUAL - -MANUAL IMPORTANTE - --No lo descarte MANUEL IMPORTANT - --A Conse

McCulloch 248729

downloaded: 4File size: 485 kb    Manafacture: McCulloch  
Category: Garden Tools

A blade with worn teeth besides providing poor performance might also generate a sudden thrust. This can result in a violent sideways kick caused when the blade touches against wood or solid bodies, such thrust might then cause the operator to loose control of the machine itself. Never attempt to work with a damaged blade but replace it with a new one. THRUST: can occur when using any type of circular blade within the risk area: therefore it is advisable to cut using the remaining area of the bl





Category