Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
• When moving system, use caution to keep mechanism from shifting. • Keep pole top covered with cap at all times. • Do not allow water in tank to freeze. During sub-freezing weather add non-toxic antifreeze, sand or empty tank completely and store. (Do not use salt.) • Use extreme caution if placing system on sloped surface. System may tip over more easily. 201241 2/99 In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 The NBA and individual NBA member team identifications reproduced on this product are trademarks and TUFF STUFF® and associated trademarks are owned and used with permission of Mattel, Inc. Huffy copyrighted designs, and/or other forms of intellectual property, that are the exclusive property of NBA Properties, products are not sponsored, endorsed or authorized in any way by Mattel, Inc. or any of its affiliated or Inc. and the respective NBA member teams and may not be used, in whole or in part, without the written consent of subsidiary companies. NBA Properties, Inc. Toll-Free Customer Service Number for U.S: 1-800-558-For Canada: 1-800-284-For Europe: 00 800 555 85234 (Sweden: 009 555 85234) , For Australia: 1-800-333 061 Internet Address: HARDWARE IDENTIFIER Item #2 (2) Item #10 (1) Item #12 (1) Item #9 (1) Item #21 (3) * You may have extra parts with this model HARDWARE IDENTIFIER (CONTINUED) Item #7 (1) Item #8 (1) Item #13 (7) Item #14 (1) Item #15 (2) Item #16 (11) Item #18 (2) Item #19 (4) Item #20 (3) P/N 211956B 04/03 2 HARDWARE IDENTIFIER (CONTINUED) Item #47 (6) Item #25 (3) Item #23 (2) Item #30 (2) Item #31 (1) Item #35 (1) Item #37 (1) Item #36 (2) Item #38 (6) Item #39 (7) Item #44 (4) Item #48 (1) Item #50 (12) Item #55 (6) * You may have extra parts with this model. 3 04/03 P/N 211956B PARTS LIST - See Hardware Identifier Item Qty.Part No. Description 1 1 206336 Tank, (Gray) 2 2 206330 Wheel Axle, 4-1/4 Long 3 2 226401 Wheel, 4 “ (Black) 4 1 904847 Top Pole Section 1 908481 Middle Pole Section 6 1 908487 Bottom Pole Section 7 1 202820 Rod, 3/8 O.D. x 4-3/4 Long 8 1 202822 Eyebolt, 3/8-16 x 3-3/4 Long 9 1 202821 Disk, 2-3/4 Diameter 1 203063 Nylon Insert Lock Nut, 3/8-16 11 2 906410 Strut, 1” O.D. x 43 Long 12 1 203220 Nut, Nylock, 5/16-18 13 7 203218 Washer, 5/16 Flat 14 1 202541 Bolt, Hex Head, 5/16-18 x 3-3/4 Long 2 203798 Bolt, Hex Flange, 5/16-18 x 1-1/2 Long 16 11 203100 Hex Flange Nut 5/16-18 17 1 204832 Bracket, Pole Mount 18 2 203231 Carriage Bolt, 5/16-18 x 3-1/2 Long 19 4 220154 Washer, metal, 3/4” O.D. 3 201124 Locknut, Hex Head, 3/8-16 21 3 206360 Bolt, Hex Head, 3/8-16 x 2-5/8 Long 22 2 204858 Spacer, Biscut, plastic 23 2 204857 Spacer, metal 1/2” O.D.x1.44 Long 24 2 204859 Cover, Spring 3 203038 Carriage Bolt, 5/16-18 x 2-3/4 Long 26 1 204850 Pin, Locking 27 1 204853 Lanyard, Black Coil 28 1 904833 Height Adjustment Rod 29 1 204872 Label, Height Indicator 2 203103 Carriage Bolt, 5/16-18 x 2 Long 31 1 204803 Screw, Phillips Head 32 1 204855 Handle, Left 33 1 204856 Handle, Right 34 2 900846 Board Bracket 1 203493 Nut, 1/4-20, Center Lock 36 2 201129 Spacer, .402 I.D. x .5 O.D. x 1.8 Long 37 1 240017 Bolt, Hex Head, 1/4-20 x 2-1/4 Long 38 6 206311 Spacer, Plastic, .530 I.D. x .50 Long 39 7 206340 Locknut, Hex Head, 1/2-13 2 904820 Elevator Tube, Lower-Long 41 1 204838 Spring 42 1 Rim 43 2 904808 Elevator Tube, Upper-Short 44 4 201651 Spacer, 1/4 Long x 1/2 O.D. 2 900867 Plate, Triangle, (Black) 46 1 202814 Cap, Pole Top 47 6 206244 Bolt, Hex, 1/2-13 x 8 Long 48 1 204870 Bolt, Hex, 1/2-13 x 3-1/2 Long 49 2 203617 Plug Cap 12 201219 Smart Clip, Net Holder, 51 1 Net 52 1 201568 Anchor, T-Strap 53 1 203124 Stake, Tie Down 54 1 201252 Label, Height Adjustment and Moving 6 202862 Spacer .563 I.D. x 1.19 Long 56 4* 203257 Zip Tie 57 1 203255 Front Cover WARRANTY CARD: Please remember to complete your product * You may have extra parts with this model. registration form either on-line at: or mail-in the enclosed postcard. P/N 211956B 04/03 4 BEFORE YOU START! Test fit bolts into large holes of elevator tubes, backboard brackets and triangle plates. Rock the bolt in a circular motion to ream out any possible excess paint. ENGLISH INSTRUCTIONS IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL 1. Remove all contents from underside of tank. Keep tank (1) bottom side up. 2. Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by tapping wheel downward with hammer, snapping it into position. Repeat for opposite side, then carefully, turn tank (1) over. 3. Mark pole sections with tape as shown. 4. IMPORTANT! Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. While maintaining alignment, bounce pole top (4) and middle section (5) together as shown until they no longer move toward taped reference mark. Upright assembly. NOTE: Pole sections should have a 3-1/2” (9 cm) minimum overlap. 5. IMPORTANT! Center alignment slot of lower pole...