Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Anetsberger Brothers 14G

downloaded: 4File size: 176 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

the pilot flame 2. Loose spark wire; loose igniter nut. 3. Piezo-electric igniter does not generate a spark. 2. Check spark wire connection at the igniter nut and make sure the connection is tight. 3. Replace igniter mechanism (portion with pushbutton). Pilot flame does not stay lighted. 1. Dirty/sooty pilot burner. 2. Low gas supply pressure [less than 6” W.C. for natural gas; (11” W.C. for propane) when all other gas-powered equipment is operating]. 3. Pilot flame too small to heat the thermoc

Anetsberger Brothers FFM150

downloaded: 5File size: 122 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

This easy to store mobile filter unit removes crumbs and sediment that cause flavor transfer and faster shortening breakdown. The compact system is simple to disassemble using quick disconnects making it very easy to clean. Changing filter envelopes is a snap with the unique and simple Anets design. Serve a great tasting product and save money and time with the Anets Portable Filter System. STANDARD FEATURES ■ New Anets filter screen eliminates clogging utilizing a special envelope style filte

Anetsberger Brothers MX-7A

downloaded: 0File size: 166 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

Turn the thermostat until it ‘clicks’ off (causing the main burners to go out); note the setting where this occurs. Repeat this temperature ‘click points’ step at least three times to ensure that the shortening temperature has stabilized. Measure the temperature of the shortening by inserting an accurate thermometer about 4 inches into the shortening to measure its temperature. If the temperature variation between the measured temperature and the thermostat setting is 10°F or less, the thermosta

Anetsberger Brothers Food & Beverage Maker

downloaded: 0File size: 858 kb    Manafacture: Anetsberger Brothers  
Category: Blenders

With superior products, equipment and programs, Ecolab’s Food & Beverage Division – the leader in its markets – helps facilitate their production for safe human consumption. Clean-in-Place (CIP) 1. An accurrate, efficient computerized dispensing program and system used during a plant’s cleaning cycle to clean and sanitize processing lines, tanks and filling equipment that carry food, beverage and dairy products. 2. Without CIP technology, pioneered by Ecolab, processing lines and pipes must be d

Anetsberger Brothers MX-14E

downloaded: 3File size: 166 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

DO NOT use a flame to check for leaks. 1. Ensure that the gas control valve knob in the 5. Open the gas supply line valve (handle in-line fryer has its OFF position next to the valve with line direction); then, confirm that all gas mark. supply line joints and couplings are free of leaks using soap suds or a leak-check solu 2. Ensure that the gas supply inlet line valve is tion, after the fryer is in its desired location. closed (handle crosswise to the line direction). 6. Plug the fryer’s elect

Anetsberger Brothers FFM-150

downloaded: 2File size: 90 kb    Manafacture: Anetsberger Brothers  
Category: Water Dispensers

WARNING Only use filter paper envelopes from Anetsberger Brothers that have been specifically designed for this filter system. Using the wrong type of filter paper can cause damage to the pump system, and will void the Warranty ! DANGER ! Make sure the filter pan has cooled completely to room temperature before attempting to change the paper. 1. Unplug the cord from the receptacle. 2. Disconnect the line from the pump to the filter screen. 3. Remove the filter cover. 4. Remove the filter screen

Anetsberger Brothers MX-7E

downloaded: 6File size: 166 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

You may have to press down the control knob for as long as several minutes until the pilot flame burns steadily. 1. Switch the circuit breaker controlling electric power to the fryer to ON. 2. Ensure that the fryer’s thermostat knob is set to OFF. 3. Open the gas supply line inlet valve to the fryer by aligning the gas valve handle with the gas line piping. 4. Open the front door and move the right pilot viewing/lighting port cover aside. 5. Turn the gas control valve knob to align the PILOT set

Anetsberger Brothers SLE40

downloaded: 5File size: 103 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

electric fryer design provides high efficiency, quick recovery and short preheating time! Tubular type heating elements produce efficient energy transfer for fast frying and quick recovery to produce maximum cooking output of the fryer. Increase your frying capacity per hour with the new Anets SLE40 electric fryer. Simple to install, simple to operate, simple to clean. The SLE40 electric fryer has been engineered with high reliability and priced to purchase today. STANDARD FEATURES Stainless s

Anetsberger Brothers FFM-80

downloaded: 1File size: 90 kb    Manafacture: Anetsberger Brothers  
Category: Water Dispensers

capacity FFM-150 Portable Filter System - 150 lb. capacity Standard Accessories furnished in the shipping carton with this filter include: (1) Filter Screen Assembly Box of Filter Paper (100 pcs.) Return Hose Assembly NOTE: A Parts List for each Anets Filter System is among the items shipped with each unit. If an additional copy of this list is needed, please contact the factory as directed on the back cover. INST INSTINSTINSTINSTINSTALLA ALLAALLAALLAALLAALLATION INSTR TION INSTRTION INSTRTION I

Anetsberger Brothers 14VF

downloaded: 5File size: 163 kb    Manafacture: Anetsberger Brothers  
Category: Fryers

Damage caused by melting solid shortening will NOT be covered by the warranty. ! FRYER PREPARATION FOR USE “BOIL OUT” INSTRUCTIONS Before using the newly installed fryer for food preparation, clean the rust preventive material from the kettle: 1. Thoroughly wipe the interior of the kettle with clean cloths. Open the front door on the lower portion of the fryer to access the drain ball valve. Open the drain ball valve (by aligning the valve handle with the drain ball valve) and wipe the entire dr





Category