Loosen the two thumbscrews (turn counter-clockwise) at the rear of the printer (Figure 1 and Figure 2), and then carefully slide the formatter board out of the printer (Figure 3). Figure 1 ■g Ф I Figure 2 Carefully slide the' formatter board out of the printer. Figure 3 2. Set the formatter board on a clean flat surface (Figure 4). Insert the font card into card slot #2 (center card slot) as shown (Figure 5). The font card cannot be used in card slot #1. Do not remove or change the slot p

Customers outside the United States, please call (304) 232-0899. Document #50-70409-001 Rev. A Page 2 of 5 Font Card Installation Guide Hewlett-Packard 4250 / 4350 Printers: IMPORTANT: Ensure the printer power is switched OFF, and then disconnect the printer power cord from the AC wall outlet. 1. Unsnap and slide the right-rear panel toward the rear of the printer (Figure 1). 2. Open the electronics access door (Figure 2). The metal door can easily be removed by lifting the door off the

Click on the desired selection below to view the instructions for your HP printer. • HP 2420 I 2430 printer..................................................Page 2 • HP 4250 I 4350 printer.................................................Page 3 HP 9050 printer...........................................................Page 4 Document #50-70409-001 Rev. A Page 1 of 5 Font Card Installation Guide Hewlett-Packard 2420 / 2430 Printers: IMPORTANT: Ensure the printer power is switched OFF, and t