Be 3® Quasar 12-Volt 2-Mile Navigational Light Without Wire Leads: 3100-3104, 3130-3134 With 7" Wire Leads: 3120-3124, 3150-3154 Attwood marine hardware, navigational lighting, bilge pumps, and other marine accessories are specified more than any other brand by America’s best-known boat manufacturers as original equipment. Look to Attwood for quality replacement parts and marine accessories. SAVE THESE INSTRUCTIONS Form Number 69385 Rev. B 03-10 Meets USCG CFR 183.810, ABYC A-16 requirements, an

The Boat Trailer Guide Protectors simply slide on and fit tightly on the existing guide poles. The Boat Trailer Guide Protectors are designed to float up with the water height to help guide you on boat ramps with steep angles. Available in 4 sizes and a wide variety of colors! PART NUMBERS AND SPECIFICATIONS I.D. Length Color Aftermarket Packaging* 2" I.D. 36" Black 105693BK 2.5" I.D. 36" Black 105694BK Forest Green 105694FG Navy 105694NV Red 105694RD Royal 105694RB Silver 105694SV 48

The lens completely encloses the bulb and socket for a splash resistant seal. Lights meet USCG CFR 183.810, ABYC A-16 requirements, and all applicable standards as tested by Imanna Labs, March 1997. 5040, 5045, and 5080 are Sidelights with 1 Nautical Mile visibility. 5940 and 5980 are All-Round Lights with 2 Nautical Mile visibility. All use Lamp 9235, #906, 13V, 6 Candle Power. REQUIRED FOR INSTALLATION • Cordless drill with 1/8", 3/8", and 3/4" (3, 10, and 19mm) bits. • Screwdriver. • Two #8 o

Mount the anti-glare light in a position so that: • Light output is flat and parallel to water when boat is floating. • Light shines 360°, unobstructed. • Light does not shine on operator, or reflect off any part of the boat in the operator’s field of vision. Figure 1 7.5° or 39-3/8" One meter INSTALLATION Figure 2 Base #911339, 911370, or 911445 Pole Screw • Poles Without Locking Collar (5300 Series) 1. Align pole screw with slot in the existing base. Insert pole into base (Figure 2). 2. Press

Pump must operate on 6 to 32 volts D.C. (see chart). The switch can be mounted separately from the pump; it can also attach to the mounting bracket of any Attwood V-Series pump—4204, 4206, 4207, 4209, or 4212. Input Maximum DC Voltage DC Amperages 12 12 24 6 32 4.5 WARNING: This product is not intended for use with AC voltage systems, including AC-to-DC converted power sources. Always disconnect the power source when installing or servicing this product. Always use the fuse amperage rating speci

Products that are replaced or for which a refund is issued become the property of Attwood. THIS WARRANTY IS ATTWOOD’S ONLY EXPRESS WARRANTY OF THIS PRODUCT. NO IMPLIED WARRANTY SHALL EXTEND BEYOND ONE (1) YEAR FROM THE DATE OF ORIGINAL CONSUMER PURCHASE. ATTWOOD SHALL NOT BE LIABLE FOR ANY DAMAGES FOR LOSS OF USE OF THIS PRODUCT, NOR FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS OR EXPENSES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or

D 03-10 Cet interrupteur marin automatique permet de faire fonctionner automatiquement les pompes d’assechement standard. La pompe doit fonctionner sous une tension de 6 a 32 volts c.c. (voir le tableau) L’interrupteur peut etre installe independamment de la pompe; il peut aussi etre installe sur la bride de montage des pompes d’Attwood de serie V (4204, 4206, 4207, 4209 ou 4212). Arrivee Amperages c.c. voltage c.c. maximum 12 12 24 6 32 4,5 AVERTISSEMENT: Cet appareil ne doit pas etre raccorde

Monroe Street, Lowell, MI 49331-0260 EXTENDING AND FOLDING THE POLE (5540 Series) The light is shipped with the pole folded and collars locked. 1. To unlock pole: Hold folded pole with lens upright. Pull the collar down (on lens half of the pole). Pull the opposite locking collar up. This separates the collars. (Figure 2) CAUTION: When unfolding pole, do not pinch fi ngers in hinge. 2. Press down fi rmly to engage electrical connectors. With Easy Lock Base, be sure locking spring clicks over pol

Position pump in the lowest accessible part of the bilge. On sailboats, location should be centered over keel. (Figure 1) Thru-Hull Connector Hose & Clamp Hose MUST Rise Upward with NO DIPSuitable Mounting Pad Base Strainer 12" min. Above Water Line 2. Do not mount pump directly to hull. Attach base strainer to a marine plywood mounting pad that is fiberglassed to the hull. HOSE CONNECTION INSTRUCTIONS IMPORTANT: To prevent airlock, hose must rise continually upward to the thru-hull connector wi