1 FEATURES AND FUNCTIONS .............................. 2 NAME OF PARTS ................................................... 3 PREPARATION ....................................................... 5 OPERATION ........................................................... 6 TIMER OPERATION ............................................... 8 SLEEP TIMER OPERATION ................................... 9 MANUAL AUTO OPERATION ............................... 9 ADJUSTING THE DIRECTION OF AIR CIRCULATION .......

tUI is an unlimited interlock, that has no maximum time value. tMLI is a limited time-out that has a defined minimum. tLI is a limited time-out, that has a defined maximum. 2) All timing parameters are measured at the connector of the device to which the parameter applies. For example, the sender shall stop generating STROBE edges tRFS after the negation of DMARDY-. Both STROBE and DMARDY- timing measurements are taken at the connector of the sender. 3) All timing measurement switching points (l

Guide the cable through the cable routings of the rack. 3.6 Prepare the keyboard E Plug the appropriate connector of the keyboard cable into the socket on the underside of the keyboard as shown in the illustration above. A26361-K646-Z102-1-7619 Connecting devices to the server Installation A26361-K646-Z102-1-7619 21 3.7 Connecting devices to the server All ports are on the rear of the server. Which ports are available on your server depend on the boards installed. The standard ports are marked w

In the event of compressor failure during heat pump operation, unit shall automatically switch to electric resistance heat to maintain selected room temperature regardless of outdoor temperatures. Specifications for Optional Internal Condensate Removal (ICR) system for 3900 or 5800 series heat pump units. The unit shall have a factory-installed Internal Condensate Removal (ICR) system to permit unit to automatically dispose of heat pump generated condensate water with no overflow to outdoors dur

Ref. No. Description Part No. Ord. Q'ty Ref. No. Description Part No. Ord. Q'ty RY-36FA RY-36UA RY-36FA RY-36UA 8 Air Filter 9359739005 9359739005 338-2 Motor Fixture-B 9359703006 9359703006 12 Base Assy 9359680000 9359680000 345-1 Filter Guide-R 9359692003 9359692003 34 Capacitor (Fan Motor) 9900270216 9900270216 345-2 Filter Guide-L 9359693000 9359693000 56 Sirocco Fan Assy 9359701002 9359701002 361 Bushing 9359733003 9359733003 63 Panel (Front) 9359734000 9359734000 379 Hinge Plate (Grille) 9

The log is displayed in the order of timestamps, starting from the latest timestamp. xscf> showlogs power -t Mar3017:302005 -T Mar3017:492005 -r Date Event Cause DID Switch Mar 30 17:45:31 JST 2005 Domain Power Off Operator 00 Locked Mar 30 17:35:31 JST 2005 System Power On AC Restored -- Locked EXAMPLE 8 Displays the specified date of a power log. Data with this date or later in the log is displayed. xscf> showlogs power -t Mar3017:302005 Date Event Cause DID Switch Mar 30 17:35:31 JST

Either of the following is displayed: Unavailable Available Assigned The XSB cannot be used. The XSB may be unrecognizable because it is not mounted, it contains an error, it has been assigned to another domain, or the settings of the domain or system board are not complete. The XSB is registered on the DCL and can be used. The XSB may be located in the system board pool. The XSB is reserved for or assigned to the domain. Power status of the XSB n Power is off. y Power is on. Status of

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Fujitsu Limited. © 1996-2005 Fujitsu Limited. All Rights Reserved. Preface The "NetCOBOL J Adapter Class Generator" is a tool that generates a COBOL class (adapter class) used to call a Java class. Using the adapter class thus generated makes the Java class library available from COBOL. A Java runtime environment must be insta

Recovering System BIOS - switch 2 / pinpair 2 Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore the old system BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter). On The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS- Diskette" restores the System BIOS on the mainboard. Off Normal operation (default setting). Reserved - switch 3 and switch 4 Switch 3 and 4 are reserved. A26361-D1522-Z120-3-6319 English - 15 Add

6. Install the air filter. Please consult instructions for cleaning the air filter on page 12. 7. Close the intake grille. Push the intake grill in at 4 points (the two ends of its lower side as well as two center points of the lower side, as shown in the figure) to close it. If, after cleaning the dust collection unit, the operation indicator lamp and the timer indicator lamp flash during Air Cleaning, please ensure that the unit is not damp and that the intake grille is properly closed. If,