The PIN code screen provides a secure gateway to the Main Menu. The PIN code screen can be displayed at any time by pressing the Home button on the IR Remote Control. 1. Press the Home button on the IR Remote Control. 2. The Input PIN code screen will be displayed. 3. Use the numeric keypad on the included IR Remote Control to enter the PIN code. The default PIN code is: 0000. Numeric Keypad Use the numeric keypad on the IR Remote Control to enter the PIN code. The Main Menu will automatically b

6 DVI-I Output This DVI-I output port will support an analog or digital output display device. A DVI to VGA adapter will be required when using a VGA capable display with this output port. 7 DVI/RS-232 and VGA/Audio RJ-45 Ports These RJ-45 ports connect the CAT5•4000 receiver to the CAT5•4000 sender unit using CAT-5, CAT-5e or CAT-6 cabling. When using an analog or digital video source on the channel 1 input, connect the CAT-5 cables according to the labels on both the sender and receiver units.

Your complete satisfaction is very important to us. About Gefen We specialize In total Integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line. Please visit for the latest offerings in High-Definition signal solutions or call us between the hours of 8:00 am and 5:00 pm Monday-Friday, Pacific Standard Time for assistance with your AN needs. We’ll be ha

Supports HDCP pass-through. Package Includes (1) DVI FM 2000 Extender - Sender Unit (EXT-DVI-FM2000S) (1) DVI FM 2000 Extender - Receiver Unit (EXT-DVI-FM2000R) (1) 5V DC Power Supply (EXT-PS52AIP-1.3) (1) Quick-Start Guide (QSG-DVI-FM2000) 3 SENDER UNIT LAYOUT Front Back 4 SENDER UNIT DESCRIPTIONS 1 Status This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender Unit and Receiver Unit. This LED will glow red when there Is an interrupt

c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Extender for HDMI 1.3 Over CAT-6 is a trademark of Gefen Inc. © 2008 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev X1 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel

3. Refer to the image below and locate DIP #2 on the DIP switch bank. 4. Move DIP 2 to the “ON” position. This will enable Deep Color support and will be used only if the display supports this deep color. NOTE: DIP 1 must be in the “OFF” position in order to enable deep color. 5. Reconnect power to the receiver unit. 9 DIP SWITCH CONFIGURATION DIP SWITCH CONFIGURATION – EDID Under normal circumstances, a source device (digital and analog) will require information about a connected device/display

7 5V DC Power Input Receptacle Connect the included 5V DC Locking Power Supply to this receptacle. 8 Power Indicator LED This LED will become active once the included 5V DC power supply has been properly connected to the unit and a power source. 5 CONNECTING AND OPERATING THE GEFENTOOLBOX 1:8 SPLITTER FOR HDMI WITH FST How to Connect the GefenToolBox 1:8 Splitter for HDMI with FST 1. Use the supplied HDMI cable to connect a Hi-Def source device to the HDMI input port of the GefenToolBox 1:8 Spli

Click the Save button to save the file in .TXT format. Click the Exit button to return to the Translate EDID screen. 60 HD PATTERN SIGNAL GENERATOR SOFTWARE Generating the EDID Checksum Once an EDID has been read or loaded into the HD Pattern Signal Generator, a checksum can be generated. 1. Read or load an EDID file into the HD Pattern Signal Generator. 2. Click the SUM button under the READ panel. Click the SUM button to generate the EDID checksum 61 HD PATTERN SIGNAL GENERATOR SOFTWARE 3. The

IR data cannot be transmitted from the sending unit to the receiving unit. • The RS-232C protocol is used for remote control of A/V devices at the extended display device location. The full RS-232 protocol is not supported for this purpose. 2 FEATURES Features • Immune to electro-magnetic interference (EMI) • Transmits HDMI 1.3 audio/video at full bandwidth • 1000-foot (330m) extension distance, maximum • Delivers highest quality signal of any HDMI extension method • Supports video resolutions u

Home Theater Scaler Pro is a trademark of Gefen LLC All trademarks are the property of their respective companies. © 2011 Gefen, LLC. All rights reserved. All trademarks are the property of their respective companies. Rev X2 CONTENTS CONTENTSCONTENTSCONTENTSCONTENTSCONTENTS Introduction Operation Notes Features Panel Layout Panel Descriptions Connecting And Operating The Home Theater Scaler Pro Specifications Warranty INTRODUCTION Congratulations on your purchase of the Home Theater Scaler Pro.