Votes - 2, Average rating: 5 ( )

Manafacture: Gefen File size: 3.32 mb File name: GTB-DVIKVM-ELR.pdf Language of manual:

Your complete satisfaction is very important to us. About Gefen We specialize In total Integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line. Please visit for the latest offerings in High-Definition signal solutions or call us between the hours of 8:00 am and 5:00 pm Monday-Friday, Pacific Standard Time for assistance with your AN needs. We’ll be happy to assist you. Why GefenToolBox? The GefenToolBox line offers portable and easy-to-install solutions for common AN system integration setups using DVI and HDMI connectivity. GefenToolBox products are wall-mountable and small in size. GefenToolBox products are easily transported in the field and are ready for immediate and simple Installations In working environments. These products come finished In a glossy color to blend In with either a white wall or black cabinet. The GefenToolBox DVIKVM Extra Long Range Extender The DVIKVM ELR extender extends any DVI, Ethernet, RS-232, and USB source from a computer to a monitor, touch screen display, or other digital signage application over a distance up to 330 feet (100 meters) using two Cat-5 cables. USB 2.0 data rates up to 480 Mbps are supported In addition to backward-com-patibility with USB 1.1. The Receiver Unit allows the connections of up to two (2) USB devices, providing access to printers, scanners, cameras, external storage media, digital signage, and automated control systems. This product uses Gefen ELR technology, allowing DVI, Ethernet, and RS-232 signals to travel along the same Cat-5 cable, reducing cabling costs and providing easier Installation. A second Cat-5 cable is used for USB extension. How It Works Place the DVIKVM ELR Sender Unit next to the DVI source. Use the included DVI cable to connect the computer or other DVI source to the Sender Unit. Use the supplied USB cable to connect the USB host (source) device to the USB port on the Sender Unit. Connect the Receiver Unit to the monitor or digital signage display with a DVI cable. Connect the USB devices to the Receiver Unit. Use two Cat-5 cables, up to 330 feet (100 meters), to connect the Sender Unit to the Receiver Unit. Connect the included locking power supplies to the Sender Unit and Receiver Unit, and then connect both power cords to available electrical outlets. 1 OPERATION NOTES PLEASE READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVIKVM EXTRA LONG RANGE EXTENDER CAT-5 or CAT-6 cables should not exceed 330 feet (100 meters). Shielded (STP) CAT-5 or CAT-6 is recommended. However, un-shielded (UTP) CAT-5 or CAT-6 is acceptable. NOTE: The shielded cable has an advantage by providing Immunity to Electromagnetic Interference (EMI), cell phones and A/C motors. The GefenToolBox DVIKVM Extra Long Range Extender Over One CAT5 features the ability to generate compatible EDID and Hot Plug signals when working with different brands of source devices and monitors. This product does not support HDCP content with DVI. 2 FEATURES Features Supports DVI resolutions up to 1920x1200 @ 60 Hz or 1080p at 330 feet (100 meters) Extends USB 2.0 up to 330 feet (100 meters) Supports USB 2.0 480 Mbps • Backward-compatible with USB 1.1 devices Extends Ethernet and RS-232 signals Works with PC and Mac computers Locking Power Supplies Wall-mountable Package Includes (1) GefenToolBox DVIKVM Extra Long Range Extender - Sender Unit (1) GefenToolBox DVIKVM Extra Long Range Extender - Receiver Unit (1) 6 ft. DVI Cable (M-M) (1) 6 ft. USB cable (A-B) (2) 5V DC Locking Power Supplies (1) Quick Start Guide 3 SENDER UNIT LAYOUT Right Side Left Side 4 6 (7) 9 8 4 SENDER UNIT DESCRIPTIONS 1 USB Link Connector Connects the USB signals from the Sender Unit to the Receiver Unit using CAT-5e / CAT-6 cable. 2 DVt / RS-232 Link Connector Connects the DVI and RS-232 signals from the Sender Unit to the Receiver Unit using CAT-5e / CAT-6 cable. 3 Ethernet Input Connect a CAT-5 cable from a port on a local Ethernet switch to this jack. The DVIKN/M-ELR supports 10/100BaseT Ethernet. 4 5 V DC Locking Power Connector Connect the Included 5 V DC locking power supply to this connector. 5 Power Indicator This LED will glow red once the included 5V DC locking power supply has been properly connected to the unit and the locking power supply has been connected to an available electrical outlet. 6 DVI In Connect a DVI cable from the computer to this DVI-I connector. 7 RS-232 Port Connect a RS-232 Serial Cable from the RS-232 host device to this port. 8 USB Indicator This LED glows green when a USB device is connected to the Sender Unit. 9 USB In Connects the Sender Unit to the computer using a USB cable. 5 RECEIVER UNIT LAYOUT Right Side Left Side 4 6 <7) 8 >11 d ; # RECEIVER UNIT DESCRIPTIONS 1 Remote Ethernet Port Connect a CAT-5 Cable from this jack ...

Download now

Please, enter two numbers from picture: