Box 1596 Murphy, NC 28906 U.S.A. Tel No. 828-835-9765 Fax No. 828-835-9685 Important Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe accessible place. Product Type 1/8" (3 mm) Pencil Air Die Grinder Model No/Nos 5978A RPM 54,000 Cycles Per Min. C€ Serial No. Product Net Weight 0.44 lbs 0.20 Kg Recommended Use Of Balancer Or Support N0 Recommended Hose Bore Size - Minimum 5/16 ins 8 mm Recommended

It is always recommended that the tool is used when standing on the solid floor. It can be used in other positions, but before any such use, the operator must be in a secure position having a firm grip and footing and be aware that when loosening fasteners the tool can move quite quickly away from the fastener being undone. An allowance must always be made lor this rearward movement so as to avoid the possibility of handferm/body entrapment. Putting Into Service Air Supply Use a clean lubrica

- Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. ^ADVERTENCIA - El polvo generado al lijar, aserrar, afilar, taladrar y realizar otras tareas de construcción contiene sustancias químicas que podrían causar cáncer, malformaciones congénitas y otras alteraciones del aparato reproductor. SIOUX TOOLS INC 250 SNAP-ON DRIVE IPO BOX 1596 ■ MURPHY, NC 28906BUSA B P

If practical and possible, try to clear unnecessary obstructions before starting work. -Always use air hose and couplings with minimum working pressure ratings at least 1 1/2 times the maximum working pressure rating of the tool. Foreseen Use Of The Tool - 5979A This die grinder is primarily designed for use with bonded abrasive mounted point grinding wheels. It may also be used with steel rotary files and carbide burrs provided their speed rating matches or exceeds the speed of the grinder.

hose with 3/8 quick couplings. MOTOR LUBRICATION An air line lubricator set to deliver 1-2 drops per minute is recommended. SPEED CONTROL Speed of the tool may be adjusted by turning the slotted speed control which is accessible thru a hole in the valve operator ring. MAINTENANCE To flush motor, disconnect air hose and pour petroleum solvent into the air inlet. Connect to air line and run motor, then lubricate with oil. SIOUX TOOLS INC 250 SNAP-ON DRIVE IPO BOX 1596 ■ MURPHY, NC 28906BUS

It may also be used with steel rotary files and carbide burrs provided their speed rating matches or exceeds the speed of the grinder. This tool should not be fitted with cutting off wheels, saw blades, drill bits, etc. If there is any doubt about the correct use of this product contact your supplier for advice. Also, make sure that the shank size of the attachment to be driven marches the collet size fitted in the grinder and that the maximum allowed running speed of the attachment exceeds th

1 SAFETY MESSAGES 1 A WARNING 1 Operator Instructions PersonalSafety Equipment Always Read Instructions Before Includes:1 YES 1 0 "sing Power Tools 1 Use -Safety Glasses Safety Rules Use -Safety Gloves @ Always Wear Safety Goggles ores seen Use Work Stations Use -Safety Boots @ Wear Hearing Protection Putting Into Service Use -Breathing Masks A T Avoid Prolonged Exposure o Vibration Operating Use -Ear Protectors YES Disrnantlina and Assernblv. Safety rules when using a 509215092L Impact Tool -Us

.. 1 SAFETY MESSAGES 1 A WARNING 1 Operator Instructions Personal Safety Equipment Always Read Instructions Before Includes: Use -Safety Glasses YES 1 @ Using Power Tools 1 Safety Rules Use -Safety Gloves YES (^ Always Wear Safety Goggles ores seen Use Work Stations Use-Safety Boots @ Wear Hearing Protection Putting Into Service Use -Breathing Masks YES A A Avoid Prolonged Exposure To Vibration Operating Use -Ear Protectors YES Dismantling and Assembly. Safety rules when using a 5264 & 5266 Need

rated as being suitable for use with impact wrenches. - Prolonged exposure to vibration may cause injury. -Read all instructions before using this tool. Ail operators must be fully trained in its use and aware of these safety rules. - Do not exceed the maximum working air pressure. - Use personal protection equipment as recommended. - Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects and

1980, 1981, 1982, 1983 Page 1 of 2 AIR ROUTERS, NO. 1985 AIR DIE GRINDER AIR SUPPLY These power units are designed for operation on clean, dry air at a Pressure of 90 p.s.i. Line filters, lubricators and a pressure regulator will insure that the air supply is properly conditioned. Even the best air systems accumulate dirt and moisture over a period of time. Blowing out hoses and air lines periodically will help prolong motor life. HOSE A special 3/8 I.D. hose is provided. It is more flexibl