High distortion settings will allow for extremely long sustaining tones. 5. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. 6. Use the Footswitch to activate/deactivate the effect. 7. Use this 1/4 TS IN connector to plug in the instrument cable. 8. The 1/4 TS OUT connector sends the signal to your amp. Use the DC IN connection to plug in a 9v power supply (not included). The Battery Compartment is located underneath the pedal cover. To

Couple the RCA input with the car stereo or equalizer outputs using RCA type connector cables. 5. POWER FUSE Power fuse protects both this amplifier and the automobile electrical system from wrong electrical conditions. 6.POWR SUPPLY TERMINAL Connect the +12V DC power supply into the terminal by lugs and screws accessible at the panel of this amplifier. A.BATT +12V Connect +12V DC power supply wire into the terminal from the terminal of the battery. B.GROUND Ground terminal connect the g

will give a one year limited on parts and labor on all Pyle products, unless otherwise stated. In warranty merchandise will be repaired or replaced at the discretion of Pyle Audio Inc. Service Department. Just follow the instructions on the warranty card enclosed with every item to obtain warranty service. Out of warranty merchandise will be repaired with nominal charges for parts and labor. This warranty will not be extended to any product subject to misuse, abuse, neglect, accident, improper i

It also serves as a battery level indicator. 5. Use the Footswitch to activate/deactivate the effect. 6. Use this 1/4 TS IN connector to plug in the instrument cable. 7. The 1/4 TS OUT connector sends the signal to your amp. Use the DC IN connection to plug in a 9v power supply (not included). The Battery Compartment is located underneath the pedal cover. To install or replace the 9v battery, press the hinges with a pen and remove the pedal cover. This effects pedal has no on/off switch. A

Low level signal is carried through RCA cables, it is preferred to use low level inputs to the amplifier if the head unit is equipped with the low level outputs. SPEAKER OUTPUT CONNECTIONS You do not need to make any adjustment for the input connection of amplifier before you connect the speaker output. * Connect right and left speaker wire to corresponding speaker output terminals of the amplifier. * Be sure to have the positive wire from the speaker to the positive speaker terminal of the

High distortion settings will allow for extremely long sustaining tones. 5. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. 6. Use the Footswitch to activate/deactivate the effect. 7. Use this 1/4 TS IN connector to plug in the instrument cable. 8. The 1/4 TS OUT connector sends the signal to your amp. Use the DC IN connection to plug in a 9v power supply (not included). The Battery Compartment is located underneath the pedal cover. To

Before using this apparatus, read the operating guide for further warnings. 2. Power Sources- The unit should be connected to a power supply only of the type described in the operation instructions or as marked on the unit ATTENTION: The power cord of the unit should be unplugged from the outlet when left unused for a long period of time. FEATURES: 15" Subwoofer Enclosure with built-in Amplifier Module Heavy Duty MDF Construction Two 8" High Efficiency 2-Way Speakers 8" Midrange Driver 1"

Articulating arms can be adjusted to position display into desired location. Use wrench(8) to tighten and loosen the tension screw. Do not overtighten or overloosen to make the screws come out. -5°~ I 5° Thankyou for choosing our product Pyle Audio I 600 63rd st, Brooklyn, NX I I 204 (7 18)236-8000 . _ A Warning_ This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children ! 1 .Make sure these instructions are read and completely

Be sure the device is ON. Using the Microphone Incorporating Voice into the Mix To blend voice from the microphones with the audio program material, first be sure the MIC/TALKOVER switch is set to the ON position. (In this position, the MIC channel is mixed into the program like any other audio input source.) Then adjust the corresponding MIC level controls to increase or decrease the microphone level (this will not affect the main volume inputs). When a microphone is not in use, set the MIC

Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a set basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper