Connect the loudspeaker cables to the Showcase Amplifier channel output binding posts (6) located on the back panel. The Showcase 5 uses only outputs 1-5 and has caps on the speaker binding posts for channels 6 and 7. The Showcase 6 uses outputs 1-6 and has caps on the speaker binding posts for channels 6 and 7. The binding post terminals accept spade lugs, bare wire, or pins. Use the red terminal for the positive connection and the black terminal for the negative connection. Tighten loudspeaker

A blend of fine traditional craftsmanship and leading-edge technology. A leader in American-made musical instruments and equipment for over a quarter of a century. Contents Introduction................................................................... Page 2 Features................................................................................ 2 Construction.......................................................................... 3 Controls...............................................

BEFORE USING THIS APPLIANCE, READ BACK COVER FOR FURTHER WARNINGS. TM Citation Operating Guide GENERAL DESCRIPTION The Citation™ incorporates the features needed to reproduce the complex tonalities and dynamics necessary for today’s guitarist. Our extensive Research and Development program has recently yielded several significant and, we feel, pivotal breakthroughs in amplification of the electric guitar. For many years, both guitaristsand instrument amp manufacturers have diligently sought

Experimentation with, the unique middle circuit will show that it is much more effective than conventional circuits. (8) The treble control varies the high end response of the amplifier. (9) The reverb control determines the amount of delayed signal (reverb) blended into the output. This circuit is able to produce tremendous sustain and clarity by properly damping the driver coils of the reverb unit. The reverb is effective in BOTH channels. (10) The master volume control is very useful for o

No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To prevent electrical shock or fire hazard, this apparatus should not be exposed to rain or moisture, and objects filled with liquids, such as vases, should not be placed on this apparatus. Before using this apparatus, read the operating guide for further warnings. Este símbolo tiene el propósito, de alertar al usuario de la presencia de “(voltaje) peligroso” sin A aislamiento dentro de la caja del prod

Source ±99 Reserved BA Reserved for future use Osc3ModRng BB Pitch Mod. range for Mod Source 1 & 2 0-14 Osc3Mods BC Osc3ModlSens BD Sensitivity to Mod source 1 ±99 Osc3Mod2Sens BE Sensitivity to Mod source 2 ±99 Dca3Levei BF Programmed DCA 3 volume 0-99 Dca3Mods CO DCA 3 Mod. Source 0-15 Dca3ModlSens Cl Sensitivity to Mod source 1 ±99 Dca3Mod2Sens C2 Sensitivity to Mod source 2 ±99 I-IardSync2 C3 32 Spectrum'“ Bass II Appendix C System Exclusive Variable Name Offset Descriptio

a bathtub, sink, swimming pool, wet basement etc. 6. This product should be located so that its position does not interfere with its proper ventilation. H should not be placed flat againsl a wall or placed in a built-in enclosure that will impede the flow of cooling air. 7 This product should not be placed near a source of heat such as a siove, radiator or another heat producing amplifier ACCORDING TO.QSI^. ANY EXPOSURE IN EXCESS OF THE ABOVE PERMISSIBLE LIMITS COULD RESLLT IN SOME HEARING LO

All strings must be stretched upon installation. After your first tuning, carefully pull each string away from the fretboard, stretching it gently (too much force will break thinner strings). Then, retune your guitar. Peavey recommends that you replace strings in the same gauges to maintain proper neck and/or tremolo tension. If you wish to change strings with different gauges, Peavey recommends that you enlist the services of a qualified technician to make the required truss rod and/or tremol

The “0” position is maximum cut; the “10” position is maximum boost. Front Panel 1 2 3 4 5 7 8 9 10 11 12 13 14 15 6 ( ((1 110 00) ))P PPO OOS SST TT G GGA AAI IIN NN This control sets the overall gain of the Lead channel. ( ((1 111 11) ))C CCH HHA AAN NNN NNE EEL LL S SSE EEL LLE EEC CCT TT This switch selects the channel (Lead or Clean). The ACTIVE CHANNEL LEDs (6) indicate the active channel — green for Clean; red for Lead. ( ((1 112 22) ))E EEF FFX XX A AAD DDJ JJU UUS SST TT Pressing this c

If the fuse should fail. IT MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the amp repeatedly blows fuses, it should be taken to a qualified service center for repair. WARNING: THE FUSE SHOULD ONLY BE REPLACED WHEN THE POWER CORD HAS BEEN DISCONNECTED FROM ITS POWER SOURCE. GROUND SWITCH (3) Three-position rocker-type switch which, in most applications, should be operated in its center or zero position. There may