Inc. 707 Dayton Road --P.O. Box 1040 --Ottawa, IL 61350 USA Phone (815) 433-5100 -- General Fax (815) 433-5105 Home Page: Sales e-mail: orders@bb-elec.com --Fax (815) 433-5109 Technical Support e-mail: support@bb-elec.com --Fax (815) 433-5104 European Headquarters B&B Electronics Ltd. Westlink Commercial Park, Oranmore, Co. Galway, Ireland Phone +353 91 792444 --Fax +353 91 792445 Home Page: Sales e-mail: orders@bb-europe.com Technical Support e-mail: support@bb-europe.com . B&B Electronics – No

The Surge Protector uses 600W Transient Voltage Suppressors to protect pins 2 through 8 and pin 20. It has one DB-25 male and one DB-25 female connector with all 25 pins passing straight through. The TvSs are connected between the ground screw and pins 2,3,4,5,6,7,8, and 20. The 232DSP will suppress any voltage levels above 12 volts without affecting the normal RS-232 data. The 232DSP is placed inline, between the data cable and the RS-232 port, as close to the protected port as possible. The g

All rights reserved. Model: 232HSP RS-232 High Energy Surge Protector CE Overview The Model 232HSP is designed to help protect against lightning strikes, power surges, and other types of voltage disturbances. Pins 2 through 8 and 20 are protected on a DB-25 style connector with a final clamping voltage of approximately 15 volts. The 232HSP offers three stages of protection starting with a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). In or

20 Chapter 3 Manual Documentation Number: ESP904-0504 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – elec. com B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph + 353 91- 792444 – Fax +353 91-792445 – bb- europe. com Figure 14. VLINX ESP Setup Window Figure 15. The Choose Destination Window Step 3: When Choose Destination Location appears, Click Next. The installation progress will be shown until com

PCMCIA High Speed Serial Card CE Model 232PCC Documentation Number 232PCC0499 This product designed and manufactured in Ottawa, Illinois USA of domestic and imported parts by International Headquarters B&B Electronics Mfg. Co. Inc. USA 707 Dayton Road --P.O. Box 1040 --Ottawa, IL 61350 Phone (815) 433-5100 -- General Fax (815) 433-5105 Home Page: Sales e-mail: orders@bb-elec.com --Fax (815) 433-5109 Technical Support e-mail: support@bb.elec.com --Fax (815) 433-5104 European Headquarters B&B Elec

All rights reserved. Package Contents Configure DIP Switch • EIR102 Series Industrial Media Converter • Quick Start Guide (One per shipment) • Power Terminal Block (installed) • Fiber Optic Dust Covers (installed on fiber optic models) If any item is missing or damaged, contact B&B Electronics for a replacement 1. Fiber to Copper models have a 6 position switch. 2. Fiber to Fiber models have a 4 position switch. 3. Switches are numbered from the bottom. 4. Cycle power after changing D

Miniature Fiber Optic Modem With V.54 Diagnostics Model 1140 Documentation Number 11401198 B&B Electronics Mfg. Co. Inc. 707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 PH (815) 433-5100 -- FAX (815) 433-5105 Internet: orders@bb-elec.com support@bb.elec.com B&B Electronics --March 1998 Documentation Number 11401198 Manual Cover Page B&B Electronics --PO Box 1040 --Ottawa, IL 61350 PH (815) 433-5100 --FAX (815) 433-5105 Table of Contents 1.0 WARRANTY INFORMATION .............................

Co. Inc. 707 Dayton Road Ottawa, IL 61350 USA Phone (815) 433-5100 --General Fax (815) 433-5105 Website: Sales e-mail: orders@bb-elec.com --Fax (815) 433-5109 Technical Support e-mail: support@bb.elec.com --Fax (815) 433-5104 European Headquarters B&B Electronics Ltd. Westlink Commercial Park Oranmore, Co. Galway, Ireland Phone +353 91-792444 --Fax +353 91-792445 Website: Sales e-mail: sales@bb-europe.com Technical Support e-mail: support@bb-europe.com © B&B Electronics – May 2006 Manual Documen

Step 2: Select the Search all reachable servers check box, then click OK. Figure 38. The Search Setup Window Manual Documentation Number: ESP901- 902- 3704 Chapter 6 43 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815- 433- 5100 - Fax 815- 433- 5104 – B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91- 792444 – Fax +353 91- 792445 – Installing Virtual COM Port The program searches the LAN for all available Serial Servers. When

Serial devices no longer are limited to a physical connection to the PC COM port. They can be installed anywhere on the LAN using TCP/IP or UDP/IP communications. This allows traditional Windows PC software access to serial devices anywhere on the LAN/WAN network. Direct IP Direct IP Mode allows applications using TCP/IP or UDP/IP socket programs to communicate with the asynchronous serial ports on the serial server. In this mode the PES1A/PESV1A is configured as a TCP or UDP server. The socket