Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Woodstock SHOP FOX W1685

downloaded: 2File size: 5 mb    Manafacture: Woodstock  
Category: Other Tools

To install the separator and transfer hose, do these steps: 1. The separator has three tabs with threaded holes along the bottom edge for mounting. Orient the separator so the holes align with supports and the inlet is pointed toward the separator body. See Figure 15. 2. Secure the front and back supports using the hex bolts and washers provided. 3. Secure the upper bag support rod and the last separator support to the separator as in Figure 16. 4. Slide a wire hose clamp onto the end of the tra

Woodstock M1016

downloaded: 23File size: 73 kb    Manafacture: Woodstock  
Category: Lathe

Woodstock SHOP FOX M1103

downloaded: 4File size: 6 mb    Manafacture: Woodstock  
Category: Nail Guns

The assembly should now be assembled as shown in Figure 8. Figure 6. Sliding table support and rack over the column. Figure 7. Correct column ring orientation. Figure 8. Handles and lock levers installed. SET UP -13 M1102/M1103 16-Speed Drill Press Headstock SET UP The headstock must be mounted on the column/base assembly before the drill press can be operated. Moving and installing the headstock is a two-person job. To install the headstock, do these steps: 1. Loosen the two set screws on the r

Woodstock SHOP FOX W1778

downloaded: 4File size: 2 mb    Manafacture: Woodstock  
Category: Nail Guns

If you have comments about this manual, please contact us at: Woodstock International, Inc. Attn: Technical Documentation Manager P.O. Box 2309 Bellingham, WA 98227 Email: manuals@woodstockint.com Tool Data Staple Size .......................... 18 Gauge Staple Length........................ 5.8"-15.8" Staple Crown ...............................1.4" Magazine Capacity...............100 Staples Air Inlet.................................." NPT Weight ................................. 3.2 lbs. Oper

Woodstock M1015

downloaded: 26File size: 2 mb    Manafacture: Woodstock  
Category: Lathe

Woodstock SHOP FOX W2005

downloaded: 3File size: 2 mb    Manafacture: Woodstock  
Category: Pets Equipment

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in Taiwan CONTENTS INTRODUCTION ............................................................................................ 2¦¦¦¦ General........................................................................................................... 2 Warranty ...................................................................................................

Woodstock SHOP FOX W1687

downloaded: 1File size: 3 mb    Manafacture: Woodstock  
Category: Other Tools

You'll be amazed at how well it works! Metal trash can must be used for grounding purposes. Fits cans with 20" - 21" diameter opening. Model W1050 Dust Collection Basics Handbook carefully guides you through setting up a quality dust collection system in your shop. Includes an easy-to-follow walk-through on designing the optimum dust collection system, and practical tips for minimizing cost and maximizing performance. A must have for beginners! 64-pages. -30- Model W1687 (For Machines Mfg. Si

Woodstock SHOP FOX W1704

downloaded: 3File size: 1 mb    Manafacture: Woodstock  
Category: Lathe

REVISED AUGUST, 2008 (TR) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT #5378TR THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China Ak WARNING! This manual provides critical safety instructions on the proper setup, operation, maintenance and service ofthis machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The

Woodstock NAILER/STAPLER KIT W1775

downloaded: 0File size: 2 mb    Manafacture: Woodstock  
Category: Nail Guns

....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Woodstock D2258

downloaded: 6File size: 49 kb    Manafacture: Woodstock  
Category: Wireless Accessories

It can either be mounted to a wall or laid flat on a table or bench top. If you are planning to utilize the flashing light feature, it will be most easily visible if it is wall-mounted. The unit should be within 15 feet of the telephone receiver to allow connection of the audio sensor. You will also need access to a 110V outlet to plug in the power transformer. The unit should be located at least 5 feet away from the nearest machine(s). If the machine is too close, the ambient sound from the ma





Category