To start the interval measurement, press the SSS button with the interval displayed in the lower display. Pressing the SSS button with the interval displayed does not affect start/stop of the measurement in the wristwatch. However, the elapsed time measurement in the wristwatch will start just as the interval starts, when the auto-mode is off ( lights off) and measurement is stopped. 4. When the interval counts down to zero, it will automatically change to recovery timer, which counts up until n

Nos. 5236759/6957926 Pat./Design Pat. Pending Copyright© 2009 CATEYE Co., Ltd. CCAT2W-090526 3 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:( 1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expres

The more you ride, the more frequently maintenance will be required. We recommend you spend a little time on regular maintenance tasks. The following schedules are a useful guide and by referring to Part 5 of this manual, you should be able to accomplish most tasks. If you require assistance, we recommend you see a scooter specialist. Tire Pressure: Check tire pressure, inflate to the range recommended on the tire sidewalls. Schedule 1 - Lubrication Pegs: There are many different types of pegs-t

_— MSC2DxMM-010604 1 Printed in Japan 10666001201 For the sake of easy installation and operation, some components have been changed. When installing to your bicycle, follow the explanation written in this sheet, not the Quick Start manual. Parts Make sure that the following parts are included in the package. O Bracket (with 2Dx attachment) G Rubber Pad G Sensor G Band Holder Pad G Sensor Band-A (L/S) G Screw O Sensor Band-B G Magnet G Nylon Tie © Attachment for Aerofork Installation F

• Be sure to securely mount the magnet, the sensor, and the bracket on your bicycle. Periodically check to insure they are mounted securely and the screws are not loosen. • Keep batteries out of reach of small children. Dispose of batteries according to local regulations. • Avoid unnecessary prolonged exposure to the sun. Never attempt to disassemble the computer head. • Don’t use thinner, benzene or alcohol to wipe the surface of the computer. They may damage the surface of computer. Computer S

Always keep the battery set (NC-200) fully charged especially before storage and prolonged periods of non-use. • Never use damaged or broken cord. • Short circuiting the battery's terminal with the charger's plug may cause overheat and damage the battery set. • The battery pack (NC-200) is restricted to use for this unit. Never use it with other products. • Avoid overdischarging the lighting system, e.g., switch it on until power completely run off. It will shorten the battery life. • Never char

On the other hand, the pulse rate is measured as follows. • By palpating an artery near the skin surface, such as the carotid artery, measure the pulse count of a blood vessel. •Transmit a sensor light to an earlobe or finger tip, and measure the pulse count via the subtle changes of the sensor light transmission caused by the heart beat. Although the measurement principle and method are different, both the heart and pulse rates have the same value per minute, and are therefore regarded as synon

• You can change the pedal resistance using the and buttons. The pedal resistance can be changed in the range between the maximum of "exercise period" (4.0 kg·m) and the minimum of "relief period" (0.5kg·m); it increases/decreases while the exercise pattern shape is maintained. Reference: When the pedal resistance is changed, the entire pattern changes. However, the data for the exercises already completed does not change. • Pressing the MODE button switches the numeric value displayed. Caution