•The configuration of your watch may differ somewhat from that shown in the illustration. To Set Time and Day Setting day 1. Pull the crown out to the first click. 2. Set the day by turning the crown. 3. Push the crown in to the normal position. Setting time 1. Pull the crown out to the second click when the second hand is at 12 o’clock position and the second hand stops. 2. Set the hands by turning the crown. 3. In accordance with a time signal, push the crown in. 24-hour hand The 24-hour hand

All sample displays in this manual are shown using dark figures on a light background. • Button operations are indicated using the letters shown in the illustration. • For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. • To ensure that this watch provid

Warning! • The measurement functions built into this watch are not intended for use in taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonably accurate representations only. • When hunting or fishing, always take proper precautions to ensure your own personal safety and the personal safety of others around you. • The hunting/fishing level indicator and moon phase indicator produced by this watch are all based on calc

To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. • The countdown timer operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown. • To completely stop a countdown operation, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. Stopwatch The stopwatch lets you measure elapsed time, split t

• For information about which cities support time calibration signal reception, see “To specify your Home City”. To swap your Home City and World Time City 1. In the World Time Mode, use D to select the World Time City you want. 2. Hold down A and B until the watch beeps. • This will make the World Time City you selected in step 1 your Home City, and cause the hour and minute hands to move to the current time in that city. At the same time, it will change the Home City you had selected prior to

All of the illustrations in this manual show Module 3358. • Button operations are indicated using the letters shown in the illustration. • All of the displays in this manual show black-on-white. • For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. Module 3358 Module 3368 Module 3798 • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be fou

Remember that not all countries or even local areas use Daylight Saving Time. l l l l ll llll l l l l DST indicator On/Off status To toggle the Timekeeping Mode digital time between DST and Standard Time 1.In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C once and the DST setting screen appears. 3. Press D to toggle between Daylight Saving Time (ON displayed) and Standard Time (OF displayed). 4. Press A twice to exit the setting

(P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 20 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off . • Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode digital time. • To stop the alarm tone after it starts to sound, press any button. • Perform

See “Solar Charging” for more information. Low Battery Alert When secondary battery power is low, the second hand of the watch will start to jump at 2-second intervals to let you know that charging is required. • See “Low Battery Alert” for more information. 30 Jumps 2 seconds Power Saving Power Saving causes the watch to enter a sleep state automatically and stop movement of the analog hands in order to save power whenever it is left in the dark. The watch will exit the sleep state if you expos

What to do if the bottom dial hand is stopped The watch is shipped from the factory with the bottom dial hand stopped in order to conserve battery power. Even though the bottom dial hand is stopped, the watch continues to maintain the current time internally. If the bottom dial hand is stopped when you purchase the watch, press any one of the watch’s buttons to start hand movement. 30 Bottom dial hand About This Manual • Button operations are indicated using the letters shown in the illustration