These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication. Operation of this equipment in residential area is likely to cause harmful interference in which case the user will be required to correct the interfere
Assign a key (2 to 9) to the selected contact. Copy the file to the SIM directory Create SMS • Create a message to send to the selected contact. Modify • Modify the data of the selected contact. Select group • Include this contact to a Contact Group. Delete • Delete the selected contact. Delete all • Delete all the contacts in Phone memory. All SIM->phone (1) • Copy all files from SIM to Phone memory. Avail. memory (1) • Display the phone memory space available in terms of contacts. Group settin
Alcatel reserves the right to alter material or technical specification of its products without prior notice. 3DS09166AAAA 01 English XG1_GB_20/11 21/11/02 06:44 Page 2 English XG1_GB_20/11 21/11/02 06:44 Page 2 XG1_GB_20/11 21/11/02 06:44 Page 1 Contents Use and Safety Precautions p. 3 1. Your telephone p. 7 1.1. Description p. 7 1.2. Keys and Indicators p. 8 2. Getting started p. 11 2.1. Battery and SIM Card p. 11 2.2. Charger p. 13 2.3. Switching your telephone on p. 14 2.4. Switching your te
Dshell commands should only be used by Alcatel personnel or under the direction of Alcatel. Misuse or failure to follow procedures that use Dshell commands in this guide correctly can cause lengthy network down time and/or permanent damage to hardware. • Use the command udprelay_do_systrace = 0 to disable systrace and enable console output. • Use the command C = x (where x=1 to 9.) This increases the levels of udprelay debug. A level of 5 will display the source, destination IP, and MAC lines se
law), G.729AB ITU-T G.711 (A and . law), G.729AB Wireless security WEP 40 and 128-bit, WPA/PSK and WPA2/PSK, Cisco FSR WEP, WPA/PSK and WPA2/PSK, Cisco FSR Configuration tool Manual or through USB cradle station Manual or through USB cradle station Push-to-talk feature No Yes BATTERIES Battery pack • Lithium-ion • 3 types (Standard, Extended, Ultra extended) • Lithium-ion • 3 types (Standard, Extended, Ultra extended) Talk time • Standard: up to 4 hours • Extended: up to 6 hours • Ultra extended
After you click ‘Apply’, the following message will be displayed on your web browser: Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router is ready with new settings. 3-2-5 UPnP Setting This function enables network auto-configuration for peer-to-peer communications, with this function, network devices will be able to communicate with other devices directly, and learn about information about other devices. Many network dev
We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLPTM based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D4000E Serial number: IMPORTANT SAFETY NOTICE WARNING: THIS APPARATUS MUST BE EARTHED. WARNING: To prevent damage which may result in fire or shock hazard, do not expose thi
The function is automatically cancelled when you hang up. Calling a second person during a conversation During a conversation, to call a second person. Transferring a call During a conversation, to transfer the call to another number: select the function associated with 'immediate forwarding' press the OK key if programming is not automatically recorded*. press the 'call forward' function key if necessary, confirm cancellation of the diversion select the function associated with 'emit in voice f