Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
This document provides information about the B.11.31.1109.02 release of the FibrChanl-03 (fcoc)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1109.02) documents defect fixes and version changes.
New and changed features in this release
New features
This feature is new with the B.11.31.1109.02 version of the FibrChanl-03 (fcoc) Fibre Channel
Mass Storage Driver for HP-UX 11i v3:
•
This release adds support for the CN1100E and NC553M HBAs.
Known problems fixed in this version
These issues have been fixed in the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 August 2011 (WEB1108) release.
Table 1 HP-UX August 2011 (WEB1108) Fixes
WEB1108 supersedes the AR1109 release.
Defect ID
Description
QXCR1001137610
This addresses issues in the driver's IO state machine.
QXCR1001124369
This enhances the driver's interrupt handling capabilities.
QXCR1001141630
This fixes a failure case in dma mapping.
QXCR1001146801
This fixes the dump driver's incorrect what string.
QXCR1001174447
Added Fibre Channel support for the CN1100E HBA.
QXCR1001174449
Added Fibre Channel support for the NC553M HBA.
Table 2 HP-UX September 2011 (AR1109) Fixes
Defect ID
Description
QXCR1001122377
This fixes the issue where the fcoc driver may panic with “Bad News!” when a fcmsutil command
is being executed while DLKM unload operation is in progress.
QXCR1001129474
This fixes the issue where the fcoc driver may panic with “Bad News!” when concurrent fcmsutil
stat commands are being run.
QXCR1001081641
This fixes the issue where, after performing a port disable/enable sequence with fcmsutil, the
fcmsutil get remote all command would not display the correct data.
QXCR1001083098 The System Management Homepage will now display the correct SLI version in the HBA Adapter
Firmware Version field.
QXCR1001115601
The maximum IO size supported by the controller has been set at 1MB.
QXCR1001075202 This fixes the issue where ioscan may not show the fcoc driver’s device special files (DSFs) when
a reboot is followed after FibrChanl-03 depot installation.
QXCR1001088875 This corrects a problem wherein a change to the allocated link bandwidth in the server profile
in the Virtual Connect Manager (VCM) failed to be displayed correctly in fcmsutil output without
either rebooting, resetting, or disabling then enabling the FC HBA. In addition to the changes
made in the FCOC driver, this fix is dependent upon specific firmware versions in the FC HBA.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview
3
...Other models in this manual:
Network Equipment - HP-UX 11i v3 I/O Cards (600.34 kb)