Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver for HP-UX 11i v2
Compatibility Information and Installation Requirements
Compatibility Information and Installation Requirements
Software Requirements
The FibrChanl-00 (td) version B.11.23.0803 for HP-UX 11i v2 (or later) must be installed before installing
A5158A or A6795A host-bus adapters (HBAs) on a system.
You can download the driver bundles from the HP Software Depot at:
http://www.hp.com/go/softwareinfo/SUPPORT_PLUS
Defects Fixed in This Version
The following defect fix is included in the B.11.23.0803 version of the FibrChanl-00 (td) driver in the HP-UX
11i v2 March 2008 release. To view the details of each defect fix, see the HP IT Resource Center website at:
http://itrc.hp.com
Table 1-1
Defect Fixes
Number
Description
QXCR1000592633
Supports users to update the EFI driver for the Tachyon XL2
(A6795A) Fibre Channel HBAs, using the FC Mass Storage
utility /opt/fcms/bin/fcmsutil.
QXCR1000732587
The A6795A Tachyon XL2 Fibre Channel HBA may support
sub-optimal link speed of 1Gbps, instead of 2Gbps, when the
HBA is connected to a switch or to an MSA1000 / XP20000 /
XP24000. This problem has been fixed in the current release of
the td driver.
Chapter 1
7
...Other models in this manual:
Network Equipment - HP-UX 11i v2 I/O Cards (131 kb)